{"title":"Water Tanks","description":"\u003cp\u003eWater tanks from NW Conversions for the Mercedes Sprinter, Ford Transit, and Ram ProMaster, plus the KUS level sensors that read them. Wheel well tanks hold 20 to 33 gallons, including driver, passenger, and center options for the ProMaster and a 25 gallon tank for dually chassis. Undercarriage and spare tire tanks mount under the van, and 10 and 20 gallon box tanks fit inside a galley cabinet or bench.\u003c\/p\u003e\u003cp\u003eWater is the heaviest thing in your build, and it shouldn't cost you floor space. Each tank is shaped to room the van already has, over a wheel well, under the floor, or in the spare tire well, so your layout stays yours. They're BPA-free, food-grade, and made in the USA.\u003c\/p\u003e\u003cp\u003eMost tanks are built for one position and one side, so check the fitment note on the product page before ordering. Pick a KUS sensor by tank height: probes run 6 to 19 inches, and many tank pages name the recommended model. Shopping for one van? See \u003ca href=\"\/collections\/sprinter-water-tanks\"\u003eSprinter\u003c\/a\u003e, \u003ca href=\"\/collections\/transit-water-tanks\"\u003eTransit\u003c\/a\u003e, and \u003ca href=\"\/collections\/promaster-water-tanks\"\u003eProMaster\u003c\/a\u003e tanks, and \u003ca href=\"\/collections\/wheel-well-cabinets\"\u003eWheel Well Cabinets\u003c\/a\u003e for a cabinet to build around them.\u003c\/p\u003e","products":[{"product_id":"nw-conversions-11-gallon-mercedes-sprinter-passenger-side-undercarriage-water-tank-sp-uc-11","title":"11 Gallon Sprinter Undercarriage Water Tank - Passenger Side","description":"\u003cul\u003e\u003c\/ul\u003e\n\u003ch2\u003eOptimize your van's water storage by mounting this perfectly-sized water tank underneath your van!\u003c\/h2\u003e\n\u003ch3\u003eFits 2007 - Newer Sprinter passenger side under slider door step area.\u003c\/h3\u003e\n\u003ch3\u003e***Sprinter GAS Engines** Does not work with GAS Engine Sprinter vans unless a Heat Shield (not supplied) is installed between the tank and the exhaust.\u003c\/h3\u003e\n\u003ch2\u003eThe Specs:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e \u003cmeta charset=\"utf-8\"\u003e37.5\"L x 9.25\"H x 12.25\"W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 11 Gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 23 Pounds\u003c\/li\u003e\n\u003cli\u003eTank is designed not to be pressurized, so make sure you vent the tank\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBPA Free, food grade plastic, suitable for fresh or grey water\u003c\/li\u003e\n\u003cli\u003eIAPMO TS-4 Certified\u003cmeta charset=\"utf-8\"\u003e\n\u003cul\u003e\n\u003cli\u003eTank has (2) 1.5\" NPT port and (2) 1\/2\" NPT ports on end that will face the rear of van and (1) 1.5\" NPT port on top\u003c\/li\u003e\n\u003cli\u003eFits with AMP Research power step\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003eMade in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eIncludes:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOne tank\u003c\/li\u003e\n\u003cli\u003eTwo stainless steel mounting brackets \u003c\/li\u003e\n\u003cli\u003eStainless steel 3\/8\" hardware ad rivnuts\n\u003cul\u003e\n\u003cli style=\"font-style: italic;\"\u003e\u003cem\u003eNote: you will ned a 17\/32\" Drill Bit and Rivnut Tool (not included)\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRETURNS are accepted up to 90 Days if the tank has not been installed or altered in any way.  The tank will need to be shipped back in the box purchased in and tracking information provided.  20% restocking fee.  Customer is responsible for return shipping.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg height=\"156\" width=\"196\" alt=\"\" src=\"https:\/\/nwconversions.com\/wp-content\/uploads\/2020\/06\/TIE-tested_certified.jpg\" class=\"alignnone wp-image-9135\" decoding=\"async\"\u003e \u003cimg height=\"134\" width=\"146\" alt=\"\" src=\"https:\/\/nwconversions.com\/wp-content\/uploads\/2020\/06\/RVIA_approved-2023.jpg\" class=\"alignnone wp-image-9127\" decoding=\"async\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"GoCode","offers":[{"title":"Default Title","offer_id":44848025370800,"sku":"NWS0241","price":289.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0571\/2448\/7344\/files\/11-gallon-sprinter-undercarriage-water-tank-passenger-side-7175170.png?v=1770215778"},{"product_id":"nw-conversions-20-gallon-wheel-well-water-tank-left-sp-l-20","title":"20 Gallon Wheel Well Water Tank - Driver Side - Transit or Sprinter","description":"\u003ch2\u003eUpgrade your van's plumbing system with our 20-Gallon Wheel Well Water Tank!\u003c\/h2\u003e\n\u003ch3\u003eDesigned for the \u003cem\u003edriver's side \u003c\/em\u003eof single-rear-wheel Mercedes Sprinter and Ford Transit vans.\u003c\/h3\u003e\n\u003cp\u003eThis durable tank is TEI Tested \u0026amp; Listed, RVIA Approved, and fits snugly over the wheel well to maximize space efficiency.\u003c\/p\u003e\n\u003ch3\u003eCompatibility:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAll\u003cb\u003e \u003c\/b\u003esingle-rear-wheel Mercedes Sprinter and Ford Transit vans\u003cem\u003e (will not fit dually vans)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Specs:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions: \u003c\/strong\u003e44.5\" x 12.5\" x 16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 20 gallons\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (Dry):\u003c\/strong\u003e 27 lbs\u003c\/li\u003e\n\u003cli\u003eMade from BPA Free Food Grade Plastic\u003c\/li\u003e\n\u003cli\u003eTEI Tested \u0026amp; Listed \/ RVIA Approved\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003eMade in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e(2) 1\/2” NPT ports on rectangular end, ready for inlet and supply fittings\u003c\/li\u003e\n\u003cli\u003e(1) 1\/2\" NPT port on bottom of open end, ready for drain fittings\u003c\/li\u003e\n\u003cli\u003e(2) 1.5” NPT port (needs to be drilled out) on top for fill or level sensor\u003c\/li\u003e\n\u003cli\u003eTank is designed not to be pressurized, so it is essential you vent the tank\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease allow 10 days for processing\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eOptimize your van's water storage with this expertly designed tank, perfect for all your on-the-road needs.\u003c\/h2\u003e\n\u003ch3\u003ePair this tank with our \u003ca href=\"https:\/\/featherbuilt.com\/products\/wheel-well-water-storage-cabinet?_pos=2\u0026amp;_sid=7e27caf2b\u0026amp;_ss=r\" rel=\"noopener\" target=\"_blank\"\u003eWheel Well Water Cabinet\u003c\/a\u003e\n\u003c\/h3\u003e\n\u003c!----\u003e","brand":"GoCode","offers":[{"title":"Default Title","offer_id":44848025403568,"sku":"NWU0247","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0571\/2448\/7344\/files\/20-gallon-wheel-well-water-tank-driver-side-2895562.png?v=1770215817"},{"product_id":"nw-conversions-24-gallon-ford-transit-wheel-well-water-tank-left-tr-l-24","title":"24 Gallon Ford Transit Wheel Well Water Tank - Driver Side","description":"\u003ch2\u003eUpgrade your van's plumbing system with our 24-Gallon Wheel Well Water Tank!\u003c\/h2\u003e\n\u003ch3\u003eDesigned for the \u003cem\u003edriver's side \u003c\/em\u003eof single-rear-wheel Ford Transit vans.\u003c\/h3\u003e\n\u003cp\u003eThis durable tank is TEI Tested \u0026amp; Listed, RVIA Approved, and fits snugly over the wheel well to maximize space efficiency.\u003c\/p\u003e\n\u003ch3\u003eCompatibility:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAll\u003cb\u003e \u003c\/b\u003esingle-rear-wheel Ford Transit vans\u003cem\u003e (will not fit dually vans)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Specs:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions: \u003c\/strong\u003e44.5\" x 12.5\" x 16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 24 gallons\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (Dry):\u003c\/strong\u003e 27 lbs\u003c\/li\u003e\n\u003cli\u003eMade from BPA Free Food Grade Plastic\u003c\/li\u003e\n\u003cli\u003eTEI Tested \u0026amp; Listed \/ RVIA Approved\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003eMade in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e(2) 1\/2” NPT ports on rectangular end, ready for inlet and supply fittings\u003c\/li\u003e\n\u003cli\u003e(1) 1\/2\" NPT port on bottom of open end, ready for drain fittings\u003c\/li\u003e\n\u003cli\u003e(2) 1.5” NPT port (needs to be drilled out) on top for fill or level sensor\u003c\/li\u003e\n\u003cli\u003eTank is designed not to be pressurized, so it is essential you vent the tank\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease allow 10 days for processing\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eOptimize your van's water storage with this expertly designed tank, perfect for all your on-the-road needs.\u003c\/h2\u003e\n\u003ch3\u003ePair this tank with our \u003ca href=\"https:\/\/featherbuilt.com\/products\/transit-wheel-well-water-storage-cabinet\" target=\"_blank\" rel=\"noopener\"\u003eWheel Well Water Cabinet\u003c\/a\u003e\n\u003c\/h3\u003e\n\u003c!----\u003e","brand":"GoCode","offers":[{"title":"Default Title","offer_id":44848025436336,"sku":"NWT0252","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0571\/2448\/7344\/files\/24-gallon-ford-transit-wheel-well-water-tank-driver-side-2186111.png?v=1770215819"},{"product_id":"nw-conversions-20-gallon-wheel-well-water-tank-right-sp-r-20","title":"20 Gallon Wheel Well Water Tank - Passenger Side - Transit or Sprinter","description":"\u003ch2\u003eUpgrade your van's plumbing system with our 20-Gallon Wheel Well Water Tank!\u003c\/h2\u003e\n\u003ch3\u003eDesigned for the\u003cem\u003e passenger's side \u003c\/em\u003eof single-rear-wheel Mercedes Sprinter and Ford Transit vans.\u003c\/h3\u003e\n\u003cp\u003eThis durable tank is TEI Tested \u0026amp; Listed, RVIA Approved, and fits snugly over the wheel well to maximize space efficiency.\u003c\/p\u003e\n\u003ch3\u003eCompatibility:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAll\u003cb\u003e \u003c\/b\u003esingle-rear-wheel Mercedes Sprinter and Ford Transit vans\u003cem\u003e (will not fit dually vans)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Specs:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions: \u003c\/strong\u003e44.5\" x 12.5\" x 16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 20 gallons\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (Dry):\u003c\/strong\u003e 27 lbs\u003c\/li\u003e\n\u003cli\u003eMade from BPA Free Food Grade Plastic\u003c\/li\u003e\n\u003cli\u003eTEI Tested \u0026amp; Listed \/ RVIA Approved\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003eMade in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e(2) 1\/2” NPT ports on rectangular end, ready for inlet and supply fittings\u003c\/li\u003e\n\u003cli\u003e(1) 1\/2\" NPT port on bottom of open end, ready for drain fittings\u003c\/li\u003e\n\u003cli\u003e(2) 1.5” NPT port (needs to be drilled out) on top for fill or level sensor\u003c\/li\u003e\n\u003cli\u003eTank is designed not to be pressurized, so it is essential you vent the tank\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease allow 10 days for processing\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eOptimize your van's water storage with this expertly designed tank, perfect for all your on-the-road needs.\u003c\/h2\u003e\n\u003ch3\u003ePair this tank with our \u003ca href=\"https:\/\/featherbuilt.com\/products\/wheel-well-water-storage-cabinet?_pos=2\u0026amp;_sid=7e27caf2b\u0026amp;_ss=r\" rel=\"noopener\" target=\"_blank\"\u003eWheel Well Water Cabinet\u003c\/a\u003e\n\u003c\/h3\u003e\n\u003c!----\u003e","brand":"GoCode","offers":[{"title":"Default Title","offer_id":44848025469104,"sku":"NWU0245","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0571\/2448\/7344\/files\/20-gallon-wheel-well-water-tank-passenger-side-5814382.png?v=1770215817"},{"product_id":"nw-conversions-24-gallon-ford-transit-wheel-well-water-tank-right-tr-r-24","title":"24 Gallon Ford Transit Wheel Well Water Tank - Passenger Side","description":"\u003ch2\u003eUpgrade your van's plumbing system with our 24-Gallon Wheel Well Water Tank!\u003c\/h2\u003e\n\u003ch3\u003eDesigned for the \u003cem\u003epassenger's side \u003c\/em\u003eof single-rear-wheel Ford Transit vans.\u003c\/h3\u003e\n\u003cp\u003eThis durable tank is TEI Tested \u0026amp; Listed, RVIA Approved, and fits snugly over the wheel well to maximize space efficiency.\u003c\/p\u003e\n\u003ch3\u003eCompatibility:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAll\u003cb\u003e \u003c\/b\u003esingle-rear-wheel Ford Transit vans\u003cem\u003e (will not fit dually vans)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eThe Specs:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions: \u003c\/strong\u003e44.5\" x 12.5\" x 16\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 24 gallons\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (Dry):\u003c\/strong\u003e 27 lbs\u003c\/li\u003e\n\u003cli\u003eMade from BPA Free Food Grade Plastic\u003c\/li\u003e\n\u003cli\u003eTEI Tested \u0026amp; Listed \/ RVIA Approved\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003eMade in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e(2) 1\/2” NPT ports on rectangular end, ready for inlet and supply fittings\u003c\/li\u003e\n\u003cli\u003e(1) 1\/2\" NPT port on bottom of open end, ready for drain fittings\u003c\/li\u003e\n\u003cli\u003e(2) 1.5” NPT port (needs to be drilled out) on top for fill or level sensor\u003c\/li\u003e\n\u003cli\u003eTank is designed not to be pressurized, so it is essential you vent the tank\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease allow 10 days for processing\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eOptimize your van's water storage with this expertly designed tank, perfect for all your on-the-road needs.\u003c\/h2\u003e\n\u003ch3\u003ePair this tank with our \u003ca href=\"https:\/\/featherbuilt.com\/products\/transit-wheel-well-water-storage-cabinet\" target=\"_blank\" rel=\"noopener\"\u003eWheel Well Water Cabinet\u003c\/a\u003e\u003ca href=\"https:\/\/featherbuilt.com\/products\/wheel-well-water-storage-cabinet?_pos=2\u0026amp;_sid=7e27caf2b\u0026amp;_ss=r\" rel=\"noopener\" target=\"_blank\"\u003e\u003c\/a\u003e\n\u003c\/h3\u003e\n\u003c!----\u003e","brand":"GoCode","offers":[{"title":"Default Title","offer_id":44848025567408,"sku":"NWT0248","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0571\/2448\/7344\/files\/24-gallon-ford-transit-wheel-well-water-tank-passenger-side-4348397.png?v=1770215816"},{"product_id":"nw-conversions-22-gallon-mercedes-sprinter-driver-side-undercarriage-water-tank-sp-uc-22","title":"22 Gallon Sprinter Undercarriage Water Tank - Driver Side","description":"\u003cul\u003e\u003c\/ul\u003e\n\u003ch2\u003eOptimize your van's water storage by mounting this perfectly-sized water tank underneath your van!\u003c\/h2\u003e\n\u003ch2\u003eThe Specs:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 46\"L x 9.25\"H x 12.25\"W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 22 Gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 23 Pounds\u003c\/li\u003e\n\u003cli\u003eTank is designed not to be pressurized, so make sure you vent the tank\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBPA Free, food grade plastic, suitable for fresh or grey water\u003c\/li\u003e\n\u003cli\u003eIAPMO TS-4 Certified\u003cmeta charset=\"utf-8\"\u003e\n\u003cul\u003e\n\u003cli\u003eTank has (2) 1.5\" NPT port and (2) 1\/2\" NPT ports on end that will face the rear of van and (1) 1.5\" NPT port on top\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003eMade in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eIncludes:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOne tank\u003c\/li\u003e\n\u003cli\u003eThree stainless steel mounting brackets \u003c\/li\u003e\n\u003cli\u003eStainless steel 3\/8\" hardware ad rivnuts\n\u003cul\u003e\n\u003cli style=\"font-style: italic;\"\u003e\u003cem\u003eNote: you will ned a 17\/32\" Drill Bit and Rivnut Tool (not included)\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRETURNS are accepted up to 90 Days if the tank has not been installed or altered in any way.  The tank will need to be shipped back in the box purchased in and tracking information provided.  20% restocking fee.  Customer is responsible for return shipping.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg height=\"156\" width=\"196\" alt=\"\" src=\"https:\/\/nwconversions.com\/wp-content\/uploads\/2020\/06\/TIE-tested_certified.jpg\" class=\"alignnone wp-image-9135\" decoding=\"async\"\u003e \u003cimg height=\"134\" width=\"146\" alt=\"\" src=\"https:\/\/nwconversions.com\/wp-content\/uploads\/2020\/06\/RVIA_approved-2023.jpg\" class=\"alignnone wp-image-9127\" decoding=\"async\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"GoCode","offers":[{"title":"Default Title","offer_id":44848025600176,"sku":"NWS0237","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0571\/2448\/7344\/files\/22-gallon-sprinter-undercarriage-water-tank-driver-side-9524596.png?v=1770215772"},{"product_id":"nw-conversions-10-gallon-galley-water-tank-fresh-grey","title":"10 Gallon Galley Water Tank (Fresh\/Grey)","description":"\u003ch3 class=\"\" data-path-to-node=\"1\"\u003e10 Gallon Universal Water Tank (12\" x 12\" x 18\")\u003c\/h3\u003e\n\u003cp data-path-to-node=\"2\"\u003e\u003cb class=\"\" data-index-in-node=\"0\" data-path-to-node=\"2\"\u003ePerfect for Galleys, Cabinetry, and Compact Conversions\u003c\/b\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"3\"\u003e\u003cspan class=\"\"\u003eMaximize your fresh water storage without sacrificing valuable interior space.\u003c\/span\u003e\u003cspan class=\"\"\u003e This \u003cstrong\u003e1\u003c\/strong\u003e\u003c\/span\u003e\u003cb class=\"\" data-index-in-node=\"84\" data-path-to-node=\"3\"\u003e0-gallon fresh and grey water tank\u003c\/b\u003e\u003cspan class=\"\"\u003e is engineered specifically for DIY van builders, truck builders, and professional RV upfitters looking for a reliable \u003c\/span\u003e\u003cspan class=\"\"\u003ewater solution.\u003c\/span\u003e\u003cspan class=\"\"\u003eWith a compact 16” x 16” footprint,\u003c\/span\u003e\u003cspan class=\"\"\u003e this tank fits seamlessly into galley cabinets,\u003c\/span\u003e\u003cspan class=\"\"\u003e bench seats,\u003c\/span\u003e\u003cspan class=\"\"\u003e or custom storage cavities in Sprinter,\u003c\/span\u003e\u003cspan class=\"\"\u003e Transit,\u003c\/span\u003e\u003cspan class=\"\"\u003e and ProMaster builds. This tank is designed to drain out straight through your subfloor and shoot out to the ground with a \u003ca title=\"automated ball valve for van water tanks\" href=\"https:\/\/www.amazon.com\/dp\/B06X9LWXMW?ref=cm_sw_r_cso_cp_apin_dp_0405ES5WKT3YX6VA0DS3\u0026amp;ref_=cm_sw_r_cso_cp_apin_dp_0405ES5WKT3YX6VA0DS3\u0026amp;social_share=cm_sw_r_cso_cp_apin_dp_0405ES5WKT3YX6VA0DS3\u0026amp;titleSource=avft-a\u0026amp;previewDoh=1\u0026amp;previewDohDeal=1\u0026amp;th=1\"\u003eball valve\u003c\/a\u003e or connect with an undermount tank for more water storage.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-path-to-node=\"4\"\u003e\u003cspan class=\"\"\u003eWeighing only \u003c\/span\u003e\u003cb class=\"\" data-index-in-node=\"14\" data-path-to-node=\"4\"\u003e10 lbs\u003c\/b\u003e\u003cspan class=\"\"\u003e empty,\u003c\/span\u003e\u003cspan class=\"\"\u003e this lightweight yet durable tank features versatile NPT fittings to make plumbing your sink or shower system simple.\u003c\/span\u003e\u003cspan class=\"\"\u003e Whether you are building a weekend adventure rig or a full-time tiny home on wheels,\u003c\/span\u003e\u003cspan class=\"\"\u003e this USA-made tank ensures you have safe,\u003c\/span\u003e\u003cspan class=\"\"\u003e clean water wherever the road takes you.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4 class=\"\" data-path-to-node=\"5\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"5\"\u003eKey Features:\u003c\/b\u003e\u003c\/h4\u003e\n\u003cul data-path-to-node=\"6\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"6,0,0\"\u003e\u003cb class=\"\" data-index-in-node=\"0\" data-path-to-node=\"6,0,0\"\u003eSpace-Saving Design:\u003c\/b\u003e\u003cspan class=\"\"\u003e The 12\" x 12\" x 18\" box shape is optimized for tight spaces like kitchen galleys or interior cavities.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"6,1,0\"\u003e\u003cb class=\"\" data-index-in-node=\"0\" data-path-to-node=\"6,1,0\"\u003eListed \u0026amp; Certified:\u003c\/b\u003e\u003cspan class=\"\"\u003e Rotomolded from \u003c\/span\u003e\u003cb class=\"\" data-index-in-node=\"34\" data-path-to-node=\"6,1,0\"\u003eBPA-Free Food Grade Plastic\u003c\/b\u003e\u003cspan class=\"\"\u003e and IAPMO TS 4 Tested\/Certified for your safety. TEI Listed and RVIA+ certified.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"6,2,0\"\u003e\u003cb class=\"\" data-index-in-node=\"0\" data-path-to-node=\"6,2,0\"\u003eVersatile Plumbing:\u003c\/b\u003e\u003cspan class=\"\"\u003e Comes pre-installed with standard \u003c\/span\u003e\u003cb class=\"\" data-index-in-node=\"54\" data-path-to-node=\"6,2,0\"\u003e1\/2\" NPT and 1.5\" NPT fittings\u003c\/b\u003e\u003cspan class=\"\"\u003e for easy connection to fill lines,\u003c\/span\u003e\u003cspan class=\"\"\u003e pumps,\u003c\/span\u003e\u003cspan class=\"\"\u003e and sensors.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"6,3,0\"\u003e\u003cb class=\"\" data-index-in-node=\"0\" data-path-to-node=\"6,3,0\"\u003eLightweight Durability:\u003c\/b\u003e\u003cspan class=\"\"\u003e Tough construction that withstands the vibrations of the road while weighing just 16 lbs.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"6,4,0\"\u003e\u003cb class=\"\" data-index-in-node=\"0\" data-path-to-node=\"6,4,0\"\u003eMade in the USA:\u003c\/b\u003e\u003cspan class=\"\"\u003e High-quality manufacturing you can trust.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 class=\"\" data-path-to-node=\"7\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"7\"\u003eTechnical Specifications:\u003c\/b\u003e\u003c\/h4\u003e\n\u003cul data-path-to-node=\"8\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,0,0\"\u003e\u003cb class=\"\" data-index-in-node=\"0\" data-path-to-node=\"8,0,0\"\u003eCapacity:\u003c\/b\u003e\u003cspan class=\"\"\u003e 10 Gallons\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,1,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"8,1,0\"\u003eDimensions:\u003c\/b\u003e\u003cspan\u003e 12” (L) x 12” (W) x 18” (H)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,2,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"8,2,0\"\u003eWeight:\u003c\/b\u003e\u003cspan\u003e 12 lbs\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,3,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"8,3,0\"\u003eMaterial:\u003c\/b\u003e\u003cspan\u003e Polyethylene (BPA Free,\u003c\/span\u003e\u003cspan\u003e Food Grade)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,4,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"8,4,0\"\u003eVenting:\u003c\/b\u003e\u003cspan\u003e Gravity fill\/vent required (Do not pressurize)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Any platform of RV\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg height=\"156\" width=\"196\" alt=\"\" src=\"https:\/\/nwconversions.com\/wp-content\/uploads\/2020\/06\/TIE-tested_certified.jpg\" class=\"alignnone wp-image-9135\" decoding=\"async\" style=\"float: left;\"\u003e \u003cimg height=\"158\" width=\"172\" alt=\"\" src=\"https:\/\/nwconversions.com\/wp-content\/uploads\/2020\/06\/RVIA_approved-2023.jpg\" class=\"alignnone wp-image-9127\" decoding=\"async\" style=\"float: left;\"\u003e\u003c\/p\u003e","brand":"GoCode","offers":[{"title":"Default Title","offer_id":44973120848048,"sku":"NWU0258","price":215.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0571\/2448\/7344\/files\/41_7be2c33f-da5b-48fd-ba07-2ad5792cbc0e.png?v=1771449833"},{"product_id":"nw-conversions-20-gallon-driver-side-transit-undercarriage-water-tank-tr-uc-20","title":"20 Gallon Transit Undercarriage Water Tank - Driver Side","description":"\u003ch2\u003e\u003cstrong\u003eMaximize your Transit’s water capacity with a Driver-Side undercarriage tank!\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eThis tank mounts under the Driver Side of your Ford Transit, next to the OEM fuel tank, using existing fuel strap mounting points to minimize drilling. Three stainless laser-cut straps and all hardware are included. Suitable for fresh or grey water, and sized to give serious water capacity without compromising your interior layout!\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eBuilt from food-grade, BPA-free polyethylene and certified to IAPMO TS-4 \/ RVIA standards. Made in the USA by NW Conversions.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003e⚠️ May NOT fit Transit vans with a rear passenger heater or AC unit due to heater lines in the mounting bay. If this is the case, consider our \u003ca href=\"https:\/\/featherbuilt.com\/products\/promaster-wheel-well-water-cabinet\" target=\"_blank\" rel=\"noopener\"\u003e16-Gallon Tank.\u003c\/a\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch3\u003eFits:\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e∙\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003eFord Transit 148″ \/ 148″ EXT (2014–present)\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e∙\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003eDriver side undercarriage, next to fuel tank\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecs:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eWeight\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e: 23lbs\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCapacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e45″ L × 12.75″ W × 8.5″ H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBPA-free, food-grade polyethylene\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIAPMO TS-4 \/ TEI Listed \/ RVIA Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMade in\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNon-pressurised — must be vented\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHardware included\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e(3) stainless steel laser-cut mounting straps, 3\/8″ hardware, 3\/8″ rivnuts. Rivnut tool required — not included.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRunning board compatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e⚠️ Does NOT fit vans with factory running boards or rear passenger heater\/AC unit. Confirm clearance before ordering.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3\u003ePorts:\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e∙\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003eRear-facing end: (2) 1.5″ NPT + (2) 1\/2″ NPT\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e∙\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003eTop: (1) 1.5″ NPT\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch3\u003eWhat’s Included:\u003c\/h3\u003e\n\u003cdiv\u003eTank, (3) stainless steel laser-cut mounting straps, stainless 3\/8″ hardware, rivnuts. \u003cstrong\u003eRivnut tool required — not included.\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eTank Compatibility:\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/8474\/4356\/files\/Transit_Water_Tank_Specs-2.png?v=1765563904\"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg style=\"float: left;\" height=\"156\" width=\"196\" alt=\"\" src=\"https:\/\/nwconversions.com\/wp-content\/uploads\/2020\/06\/TIE-tested_certified.jpg\" class=\"alignnone wp-image-9135\" decoding=\"async\"\u003e \u003cimg style=\"float: left;\" height=\"158\" width=\"172\" alt=\"\" src=\"https:\/\/nwconversions.com\/wp-content\/uploads\/2020\/06\/RVIA_approved-2023.jpg\" class=\"alignnone wp-image-9127\" decoding=\"async\"\u003e\u003c\/p\u003e","brand":"GoCode","offers":[{"title":"Default Title","offer_id":45050952810672,"sku":"NWT0243","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0571\/2448\/7344\/files\/20-gallon-transit-undercarriage-water-tank-driver-side-5623682.png?v=1776264501"},{"product_id":"nw-conversions-16-gallon-transit-undercarriage-water-tank-tr-uc-16","title":"16 Gallon Transit Undercarriage Water Tank","description":"\u003ch2\u003e\u003cstrong\u003eGet creative with your van's water storage! This flexible undercarriage tank fits perfectly under your Transit van.\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003eCompatible on passenger or driver side, and works with factory Transit Trail running boards.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cdiv\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eThis tank is designed to slot under the Ford Transit’s undercarriage. Three laser-cut stainless steel mounting straps and all required hardware are included. It fits on the passenger side under the slider door, or on the driver side next to the fuel tank — giving you placement flexibility depending on your build layout. Suitable for fresh or grey water.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eBuilt from food-grade, BPA-free polyethylene and certified to IAPMO TS-4 \/ RVIA standards. Made in the USA by NW Conversions.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eFits Transit Trail with factory running boards.\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch3\u003eFits:\u003c\/h3\u003e\n\u003cp class=\"p1\"\u003e\u003cem\u003eNow confirmed: all Transit wheelbases\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e∙\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003eFord Transit 130\", 148″, \u0026amp; 148″ EXT (2014–present)\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e∙\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003eMounts on passenger side (under slider) or driver side (next to fuel tank)\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecs:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 14 lbs\u003cbr\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCapacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e16 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e48″ L × 13″ W × 8.5″ H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBPA-free, food-grade polyethylene\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIAPMO TS-4 \/ TEI Listed \/ RVIA Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMade in\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNon-pressurised — must be vented\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHardware included\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e(3) stainless steel laser-cut mounting straps, 3\/8″ hardware, 3\/8″ rivnuts. Rivnut tool required — not included.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRunning board compatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFits Transit Trail with factory running boards. Also compatible with Owl running boards. May require minor bracket modification with other aftermarket boards.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3\u003ePorts (rear-facing):\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e∙\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e(1) 1.5″ NPT + (2) 1\/2″ NPT on rear-facing end\u003c\/div\u003e\n\u003cdiv\u003eWhat’s Included: Tank, (3) stainless steel laser-cut mounting straps, stainless hardware, rivnuts. \u003cstrong\u003eRivnut tool required — not included.\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eTank Compatibility:\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/8474\/4356\/files\/Transit_Water_Tank_Specs-2.png?v=1765563904\"\u003e\u003cimg\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg height=\"156\" width=\"196\" alt=\"\" src=\"https:\/\/nwconversions.com\/wp-content\/uploads\/2020\/06\/TIE-tested_certified.jpg\" class=\"alignnone wp-image-9135\" decoding=\"async\" style=\"float: left;\"\u003e \u003cimg height=\"158\" width=\"172\" alt=\"\" src=\"https:\/\/nwconversions.com\/wp-content\/uploads\/2020\/06\/RVIA_approved-2023.jpg\" class=\"alignnone wp-image-9127\" decoding=\"async\" style=\"float: left;\"\u003e\u003c\/p\u003e","brand":"GoCode","offers":[{"title":"Default Title","offer_id":45050952843440,"sku":"NWT0239","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0571\/2448\/7344\/files\/16-gallon-transit-undercarriage-water-tank-1844329.png?v=1776264499"},{"product_id":"nw-conversions-28-gallon-dodge-promaster-wheel-well-water-tank-center-pm-c-28","title":"28 Gallon ProMaster Wheel Well Water Tank - Center","description":"\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch2 data-path-to-node=\"1\"\u003e\n\u003cmeta charset=\"utf-8\"\u003eTransform the often-wasted space around your ProMaster van's wheel well into valuable fresh water storage!\u003c\/h2\u003e\n\u003ch3\u003e28 Gallon ProMaster Wheel Well Water Tank\u003c\/h3\u003e\n\u003cp data-path-to-node=\"3\"\u003eDesigned specifically for the \u003cb data-path-to-node=\"3\" data-index-in-node=\"121\"\u003eRam ProMaster\u003c\/b\u003e, this \u003cb data-path-to-node=\"3\" data-index-in-node=\"141\"\u003e28-gallon wheel well tank\u003c\/b\u003e contours perfectly over the wheel housing, allowing you to build your bed or cabinetry flush against the wall without losing interior volume.\u003c\/p\u003e\n\u003ch3 data-path-to-node=\"3\"\u003e\u003cstrong\u003eThis tank is a direct fit for our \u003ca rel=\"noopener\" href=\"https:\/\/featherbuilt.com\/products\/promaster-wheel-well-water-cabinet\" target=\"_blank\"\u003eWheel Well Water Cabinet!\u003c\/a\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp data-path-to-node=\"3\"\u003eConstructed in the USA from durable, BPA-free food-grade plastic, this tanks is reversible - it can be installed on either the Driver or Passenger side. It features multiple NPT ports for flexible plumbing configuration, ensuring a clean and leak-free water system for you van conversion.\u003c\/p\u003e\n\u003ch2 data-path-to-node=\"3\"\u003eKey Features:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel Well Design:\u003c\/strong\u003e Centered design sits directly over the wheel well, utilizing dead space to keep your van's center of gravity low\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Placement:\u003c\/strong\u003e Can be mounted on the Driver OR Passenger side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafe and Certified: \u003c\/strong\u003eMade from BPA-Free Food Grade Plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustomizable Fittings:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e(2) ½\" NPT Ports\u003c\/li\u003e\n\u003cli\u003e(2) 1 ½\" NPT Ports (must be drilled out to use)\u003c\/li\u003e\n\u003cli\u003e(1) 1 ½\" NPT Top Port\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003eMade in the USA!\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRam ProMaster (136, 159, and 159 EXT)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 data-path-to-node=\"9,2,0\"\u003e\u003cb data-path-to-node=\"8\" data-index-in-node=\"0\"\u003eSpecs:\u003c\/b\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb data-path-to-node=\"8\" data-index-in-node=\"0\"\u003eCapacity: \u003c\/b\u003e28 Gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 48\" (length) x 14\" (width) x 20\" (height)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 31 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVenting:\u003c\/strong\u003e Gravity fill\/vent required\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GoCode","offers":[{"title":"Default Title","offer_id":45050952974512,"sku":"NWP0246","price":329.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0571\/2448\/7344\/files\/28-gallon-promaster-wheel-well-water-tank-center-8504953.png?v=1776264499"},{"product_id":"nw-conversions-28-gallon-promaster-wheel-well-water-tank-left-pm-l-28","title":"28 Gallon ProMaster Wheel Well Water Tank - Driver Side","description":"\u003ch2 data-path-to-node=\"1\"\u003e\n\u003cmeta charset=\"utf-8\"\u003eMaximize the functionality of your ProMaster van with this 28-gallon wheel well water tank, specifically designed for the Driver’s Side (Left) of the Ram ProMaster!\u003c\/h2\u003e\n\u003ch3 data-path-to-node=\"1\"\u003e28 Gallon ProMaster Water Tank (Driver Side \/ Left Offset)\u003c\/h3\u003e\n\u003cp data-path-to-node=\"3\"\u003eUnlike centered tanks, this unit features an offset design, positioning the water storage to the left of the wheel well (extending towards the rear of the van) to accommodate specific floor plans and cabinetry layouts.\u003c\/p\u003e\n\u003ch3 data-path-to-node=\"4\"\u003eThis water tank is a perfect fit for our \u003ca rel=\"noopener\" href=\"https:\/\/featherbuilt.com\/products\/promaster-wheel-well-water-cabinet\" target=\"_blank\"\u003eWheel Well Water Cabinets!\u003c\/a\u003e\n\u003c\/h3\u003e\n\u003cp data-path-to-node=\"5\"\u003eMade in the USA from durable, BPA-free food-grade plastic, this tank is tough enough for off-grid adventures. It features the same versatile port configuration as our centered models, allowing for easy venting, filling, and sensor installation.\u003c\/p\u003e\n\u003ch3 data-path-to-node=\"6\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"6\"\u003eKey Features:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-path-to-node=\"7,0,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"7,0,0\"\u003eDriver Side Offset:\u003c\/b\u003e Designed to sit over the wheel well with the bulk of the capacity extended to the \u003cb data-index-in-node=\"102\" data-path-to-node=\"7,0,0\"\u003eleft (rearward)\u003c\/b\u003e side, ideal for driver-side galleys or bed systems.\u003c\/li\u003e\n\u003cli data-path-to-node=\"7,1,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"7,1,0\"\u003eSpace Efficient:\u003c\/b\u003e Hugs the wall and wheel housing to keep your center of gravity low and save interior space.\u003c\/li\u003e\n\u003cli data-path-to-node=\"7,2,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"7,2,0\"\u003eSafe \u0026amp; Certified:\u003c\/b\u003e Rotomolded from \u003cb data-index-in-node=\"34\" data-path-to-node=\"7,2,0\"\u003eBPA Free Food Grade Plastic\u003c\/b\u003e ensuring safe fresh water storage.\u003c\/li\u003e\n\u003cli data-path-to-node=\"7,3,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"7,3,0\"\u003eVersatile Plumbing:\u003c\/b\u003e\n\u003cul\u003e\n\u003cli data-path-to-node=\"7,3,1,0,0\"\u003e(2) 1\/2” NPT ports (open and ready to use).\u003c\/li\u003e\n\u003cli data-path-to-node=\"7,3,1,1,0\"\u003e(2) 1.5” NPT ports on ends (\u003cb data-index-in-node=\"28\" data-path-to-node=\"7,3,1,1,0\"\u003eNote:\u003c\/b\u003e Spun closed, must be drilled if used).\u003c\/li\u003e\n\u003cli data-path-to-node=\"7,3,1,2,0\"\u003e(1) 1.5” NPT top port (\u003cb data-index-in-node=\"23\" data-path-to-node=\"7,3,1,2,0\"\u003eNote:\u003c\/b\u003e Spun closed, needs drilling) for gravity fill or level sensors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"7,4,0\"\u003eMade in the USA:\u003c\/b\u003e Built to last with heavy-duty construction.\u003c\/p\u003e\n\u003ch2 data-path-to-node=\"8\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"8\"\u003eVehicle Compatibility:\u003c\/b\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli data-path-to-node=\"9,0,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"9,0,0\"\u003eRam ProMaster:\u003c\/b\u003e Optimized for the Driver’s Side wheel well.\u003c\/li\u003e\n\u003cli data-path-to-node=\"9,2,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"9,2,0\"\u003eCustom Builds:\u003c\/b\u003e Suitable for box trucks or trailers requiring an offset wheel well configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 data-path-to-node=\"10\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"10\"\u003eSpecs:\u003c\/b\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli data-path-to-node=\"11,0,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"11,0,0\"\u003eCapacity:\u003c\/b\u003e 28 Gallons\u003c\/li\u003e\n\u003cli data-path-to-node=\"11,1,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"11,1,0\"\u003eDimensions:\u003c\/b\u003e 48” (Length) x 14” (Width\/Deep) x 20” (Height)\u003c\/li\u003e\n\u003cli data-path-to-node=\"11,2,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"11,2,0\"\u003eWeight:\u003c\/b\u003e 32 lbs\u003c\/li\u003e\n\u003cli data-path-to-node=\"11,3,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"11,3,0\"\u003eOrientation:\u003c\/b\u003e Left Side \/ Driver Side Offset\u003c\/li\u003e\n\u003cli data-path-to-node=\"11,4,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"11,4,0\"\u003eVenting:\u003c\/b\u003e Gravity fill\/vent required (Do not pressurize).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GoCode","offers":[{"title":"Default Title","offer_id":45050952941744,"sku":"NWP0261","price":329.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0571\/2448\/7344\/files\/28-gallon-promaster-wheel-well-water-tank-driver-side-3723456.png?v=1776264499"},{"product_id":"nw-conversions-24-gallon-ford-transit-spare-tire-tank-tr-st-24","title":"24 Gallon Ford Transit Spare Tire Water Tank","description":"\u003ch2\u003e\n\u003cstrong\u003eFree up your Transit van's \u003c\/strong\u003e\u003cstrong\u003espare tire space for 24 gallons of water — with all mounting hardware included!\u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThis water tank is purpose-built to fit the Ford Transit's factory spare tire location, using the supplied mounting hardware for a secure, clean install. Relocate your spare to the rear door and you've instantly added substantial water storage without giving up a single inch of interior living space. Works for both fresh water and grey water applications.\u003c\/p\u003e\n\u003cp\u003eBuilt from food-grade, BPA-free polyethylene and certified to IAPMO TS-4 \/ RVIA standards. Made in the USA by NW Conversions, trusted by professional van builders and DIY adventurers across North America.\u003c\/p\u003e\n\u003ch3\u003eFits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFord Transit (2007–present) — spare tire location\u003c\/li\u003e\n\u003cli\u003eMay fit other makes and models — confirm dimensions before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCapacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e24 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e30″ L × 28″ W × 9.75″ H (approx.)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight (empty)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e34 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBPA-free, food-grade polyethylene\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWater use\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFresh water or grey water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIAPMO TS-4 \/ TEI Listed \/ RVIA Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMade in\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNon-pressurised — must be vented\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHardware included\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\/2″ mounting hardware and plates included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch3\u003ePort Configuration\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDriver side: (2) 1.5″ NPT + (2) 1\/2″ NPT\u003c\/li\u003e\n\u003cli\u003eTop: (1) 1.5″ NPT + (1) 1\/2″ NPT (float sensor or vent)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cem\u003e\u003cstrong\u003eTank Compatibility:\u003c\/strong\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/8474\/4356\/files\/Transit_Water_Tank_Specs-2.png?v=1765563904\"\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg height=\"156\" width=\"196\" alt=\"\" src=\"https:\/\/nwconversions.com\/wp-content\/uploads\/2020\/06\/TIE-tested_certified.jpg\" class=\"alignnone wp-image-9135\" decoding=\"async\" style=\"float: left;\"\u003e \u003cimg height=\"159\" width=\"173\" alt=\"\" src=\"https:\/\/nwconversions.com\/wp-content\/uploads\/2020\/06\/RVIA_approved-2023.jpg\" class=\"alignnone wp-image-9127\" decoding=\"async\" style=\"float: left;\"\u003e\u003c\/p\u003e","brand":"GoCode","offers":[{"title":"Default Title","offer_id":45050952876208,"sku":"NWT0250","price":339.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0571\/2448\/7344\/files\/24-gallon-ford-transit-spare-tire-water-tank-5359258.png?v=1776264501"},{"product_id":"nw-conversions-28-gallon-promaster-wheel-well-water-tank-right-pm-r-28","title":"28 Gallon ProMaster Wheel Well Water Tank - Passenger Side","description":"\u003ch2 data-path-to-node=\"1\"\u003e\n\u003cmeta charset=\"utf-8\"\u003eOptimize your van's layout with this 28-gallon wheel well water tank, engineered specifically for the Passenger Side of the Ram ProMaster!\u003c\/h2\u003e\n\u003ch3 data-path-to-node=\"1\"\u003e28 Gallon ProMaster Water Tank (Passenger Side)\u003c\/h3\u003e\n\u003cp data-path-to-node=\"3\"\u003eUnlike universal centered tanks, this unit features a specific offset design, contouring perfectly over the right-side wheel housing. This is ideal for balancing weight distribution in your build or accommodating galleys and cabinet systems installed on the passenger side.\u003c\/p\u003e\n\u003ch3 data-path-to-node=\"3\"\u003eThis tank is directly compatible with our \u003ca href=\"https:\/\/featherbuilt.com\/products\/promaster-wheel-well-water-cabinet\" rel=\"noopener\" target=\"_blank\"\u003eProMaster Wheel Well Water Cabinet!\u003c\/a\u003e\n\u003c\/h3\u003e\n\u003cp data-path-to-node=\"5\"\u003eRoto-molded in the USA from durable, BPA-free food-grade plastic, this tank is built for the long haul. It arrives with flexible port options, allowing you to customize your intake and venting setup for a professional-grade plumbing system.\u003c\/p\u003e\n\u003ch3 data-path-to-node=\"6\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"6\"\u003eKey Features:\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"7,0,0\"\u003ePassenger Side Offset:\u003c\/b\u003e Designed to sit over the wheel well on the \u003cb data-index-in-node=\"66\" data-path-to-node=\"7,0,0\"\u003eRight (Passenger)\u003c\/b\u003e side of the vehicle, maximizing floor space for beds or storage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"7,1,0\"\u003eLow Center of Gravity:\u003c\/b\u003e Hugs the wheel housing to keep water weight low and stable while driving.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"7,2,0\"\u003eSafe \u0026amp; Certified:\u003c\/b\u003e Made from \u003cb data-index-in-node=\"28\" data-path-to-node=\"7,2,0\"\u003eBPA Free Food Grade Plastic\u003c\/b\u003e ensuring your water stays fresh and safe to drink.\u003c\/li\u003e\n\u003cli\u003eVersatile Plumbing:\n\u003cul\u003e\n\u003cli\u003e(2) 1\/2” NPT ports (open and ready to use)\u003c\/li\u003e\n\u003cli\u003e(2) 1.5” NPT ports on ends\u003c\/li\u003e\n\u003cli\u003e(1) 1.5” NPT top port \u003cb data-index-in-node=\"0\" data-path-to-node=\"7,4,0\"\u003e\u003c\/b\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"7,4,0\"\u003eMade in the USA:\u003c\/b\u003e Heavy-duty construction you can trust.\u003c\/p\u003e\n\u003cp data-path-to-node=\"7,3,0\"\u003e \u003c\/p\u003e\n\u003ch2 data-path-to-node=\"8\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"8\"\u003eVehicle Compatibility:\u003c\/b\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli data-path-to-node=\"9,0,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"9,0,0\"\u003eRam ProMaster:\u003c\/b\u003e Optimized for the Passenger Side wheel well.\u003c\/li\u003e\n\u003cli data-path-to-node=\"9,2,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"9,2,0\"\u003eCustom Builds:\u003c\/b\u003e Suitable for box trucks, trailers, or tiny homes requiring a right-side wheel well configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 data-path-to-node=\"10\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"10\"\u003eSpecs:\u003c\/b\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli data-path-to-node=\"11,0,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"11,0,0\"\u003eCapacity:\u003c\/b\u003e 28 Gallons\u003c\/li\u003e\n\u003cli data-path-to-node=\"11,1,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"11,1,0\"\u003eDimensions:\u003c\/b\u003e 48” (Length) x 14” (Width\/Deep) x 20” (Height)\u003c\/li\u003e\n\u003cli data-path-to-node=\"11,2,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"11,2,0\"\u003eWeight:\u003c\/b\u003e 32 lbs\u003c\/li\u003e\n\u003cli data-path-to-node=\"11,3,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"11,3,0\"\u003eOrientation:\u003c\/b\u003e Right Side \/ Passenger Side Offset\u003c\/li\u003e\n\u003cli data-path-to-node=\"11,4,0\"\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"11,4,0\"\u003eVenting:\u003c\/b\u003e Gravity fill\/vent required (Do not pressurize).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GoCode","offers":[{"title":"Default Title","offer_id":45050952908976,"sku":"NWP0262","price":329.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0571\/2448\/7344\/files\/28-gallon-promaster-wheel-well-water-tank-passenger-side-6291840.png?v=1776264499"},{"product_id":"nw-conversions-28-gallon-spare-tire-water-tank-sp-st-28","title":"28 Gallon Sprinter Spare Tire Water Tank","description":"\u003ch2\u003e\u003cstrong\u003eTurn dead space in your van into 28 gallons of clean water — without touching your interior.\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cdiv\u003eThis water tank drops straight into your Sprinter’s factory spare tire basket, allowing you to utilize the most of this space. The tank is installed using the existing hardware, and zero modifications are required. Relocate your spare to the rear door and you’ve just added significant off-grid water capacity without giving up a single inch of interior living space!\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eBuilt from food-grade, BPA-free polyethylene and certified to IAPMO TS-4 \/ RVIA standards, this tank is trusted by professional van builders and seasoned DIYers alike. Compatible with fresh or grey water applications.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch3\u003eFits:\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e∙\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003eMercedes Sprinter 2500 (2007–present) — all wheelbases\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e∙\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003eWinnebago Revel, Storyteller Overland, STO Beast, Tiffin GH1\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e∙\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003eSprinter 170 EXT: verify your spare tire bracket before ordering\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e∙\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003eSprinter 3500 Dually: may require bracket modification — measure before ordering\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch3\u003eSpecs:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 22 lbs\u003cbr\u003e\u003cstrong\u003eDimensions: \u003c\/strong\u003e\u003cmeta charset=\"utf-8\"\u003e28\" W x 30\" L x 10\" H.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCapacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e28 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e28″ W × 30″ L × 10″ H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBPA-free, food-grade polyethylene\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIAPMO TS-4 \/ TEI Listed \/ RVIA Approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMade in\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNon-pressurised — must be vented\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003ePorts:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e∙\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003eDriver side: (2) 1.5″ NPT + (1) 1\/2″ NPT\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e∙\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003eTop: (1) 1.5″ NPT + (1) 1\/2″ NPT (float sensor or vent)\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch3\u003e\u003cstrong\u003eWhat’s Included:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cdiv\u003eTank only — uses factory Sprinter spare tire hardware (no extra hardware required)\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cem\u003e\u003cstrong\u003e*IF YOUR VAN DOES NOT HAVE A SPARE TIRE CARRIER THAN YOU WILL NEED \u003ca href=\"https:\/\/mbparts.mbusa.com\/v-2023-mercedes-benz-sprinter-2500--base--2-0l-l4-gas\/body--spare-tire-carrier\" title=\"spare tire carrier from Mercedes\" style=\"color: rgb(0, 0, 0);\"\u003eTHIS CARRIER\u003c\/a\u003e FROM MERCEDES*\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eTank Compatibility:\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/8474\/4356\/files\/Sprinter_Tanks_Only_Compatibility.png?v=1765563682\" alt=\"\"\u003e\u003cbr\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cimg style=\"float: left;\" decoding=\"async\" class=\"alignnone wp-image-9135\" src=\"https:\/\/nwconversions.com\/wp-content\/uploads\/2020\/06\/TIE-tested_certified.jpg\" alt=\"\" width=\"196\" height=\"156\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003cimg style=\"float: left;\" decoding=\"async\" class=\"alignnone wp-image-9127\" src=\"https:\/\/nwconversions.com\/wp-content\/uploads\/2020\/06\/RVIA_approved-2023.jpg\" alt=\"\" width=\"173\" height=\"159\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"GoCode","offers":[{"title":"Default Title","offer_id":45050953007280,"sku":"NWS0236","price":329.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0571\/2448\/7344\/files\/28-gallon-sprinter-spare-tire-water-tank-7601243.png?v=1776264501"},{"product_id":"25-gallon-dually-wheel-well-water-tank-sp-du-25","title":"25-Gallon Dually Wheel Well Water Tank","description":"\u003cul\u003e\u003c\/ul\u003e\n\u003ch2 class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eDesigned specifically for dual rear wheel vans, this tank transforms the space around your wheel well into valuable fresh water storage, keeping your floor plan open while adding serious water capacity to your van build.\u003c\/h2\u003e\n\u003ch3 class=\"text-text-100 mt-2 -mb-1 text-base font-bold\"\u003eDimensions \u0026amp; Weight\u003c\/h3\u003e\n\u003cul class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 46\" long × 14\" wide × 20\" tall\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 25 gallons\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 28 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"text-text-100 mt-2 -mb-1 text-base font-bold\"\u003ePorts \u0026amp; Plumbing\u003c\/h3\u003e\n\u003cul class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e(2) 1.5\" NPT ports on the larger end, pre-marked, drill out to use\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e(2) 1\/2\" NPT ports on the larger end\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e(1) 1.5\" NPT port on the end above the wheel well, pre-marked, drill out to use\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e(1) 1\/2\" NPT port on the end above the wheel well\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e(1) 1.5\" NPT port on top, pre-marked, drill out to use\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eNot designed for pressurized systems, must be vented\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"text-text-100 mt-2 -mb-1 text-base font-bold\"\u003eIncluded With Every Order\u003c\/h3\u003e\n\u003cul class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eSupport plate and mounting hardware included with every order\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"text-text-100 mt-2 -mb-1 text-base font-bold\"\u003eMaterials \u0026amp; Certifications\u003c\/h3\u003e\n\u003cul class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eBPA-free, food-grade plastic\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eIAPMO TS 4 Certified\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"text-text-100 mt-2 -mb-1 text-base font-bold\"\u003eVehicle Compatibility\u003c\/h3\u003e\n\u003cul class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eSprinter 3500 Dually\u003c\/strong\u003e primary fit (also fits Sprinter T1N dually)\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eTransit Dually\u003c\/strong\u003e direct fit with slightly more room around the wheel well for insulation\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eProMaster\u003c\/strong\u003e requires a 3.5\" elevation to clear the larger wheel wells\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eCompatible with other makes and models\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eCan be placed on either driver or passenger side\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/8474\/4356\/files\/Sprinter_and_Transit_Water_Tank-2.png?v=1765563494\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg height=\"156\" width=\"196\" alt=\"\" src=\"https:\/\/nwconversions.com\/wp-content\/uploads\/2020\/06\/TIE-tested_certified.jpg\" class=\"alignnone wp-image-9135\" decoding=\"async\" style=\"float: left;\"\u003e \u003cimg height=\"161\" width=\"175\" alt=\"\" src=\"https:\/\/nwconversions.com\/wp-content\/uploads\/2020\/06\/RVIA_approved-2023.jpg\" class=\"alignnone wp-image-9127\" decoding=\"async\" style=\"float: left;\"\u003e\u003cimg style=\"float: left;\"\u003e\u003cimg style=\"float: left;\"\u003e\u003cimg style=\"float: left;\"\u003e\u003cimg style=\"float: left;\"\u003e\u003cimg style=\"float: left;\"\u003e\u003c\/p\u003e","brand":"GoCode","offers":[{"title":"Default Title","offer_id":45452121473200,"sku":"NWU0253","price":329.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0571\/2448\/7344\/files\/25-gallon-dually-wheel-well-water-tank-5919140.png?v=1783970352"},{"product_id":"kus-s5u-17-water-level-sensor-1-5-npt-17-probe","title":"KUS S5U-17 Water Level Sensor – 1.5\" NPT (17\" Probe)","description":"\u003ch2\u003eAbout the Product\u003c\/h2\u003e\n\u003cp\u003eThe KUS S5U-17 is a 17\" probe, 1.5\" NPT liquid level sender for water, fuel, or diesel tanks. It outputs the American Standard 240-33 ohm curve, which is what most US-market water and fuel gauges read, so it pairs with any 240-33Ω gauge without a signal converter.\u003c\/p\u003e\n\u003cp\u003eInside, a magnetic float slides along a chain of reed switches. The float is the only moving part, so there is no wiper arm to wear out or corrode.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e**CURRENTLY ON A 3-4 WEEK LEAD TIME**\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eSpecifications\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProbe length: 17\"\u003c\/li\u003e\n\u003cli\u003eMounting: 1.5\" NPT male thread, hex head\u003c\/li\u003e\n\u003cli\u003eOutput: American Standard, 240Ω empty to 33Ω full\u003c\/li\u003e\n\u003cli\u003eSensing: reed switch chain with magnetic float\u003c\/li\u003e\n\u003cli\u003eResolution: 21mm\u003c\/li\u003e\n\u003cli\u003eBody: SUS 316 stainless steel\u003c\/li\u003e\n\u003cli\u003eFloat: NBR\u003c\/li\u003e\n\u003cli\u003eLeads: PVC jacketed, pink (ground) and black (signal)\u003c\/li\u003e\n\u003cli\u003eProtection rating: IP65\u003c\/li\u003e\n\u003cli\u003eOperating temp: -40°F to +185°F\u003c\/li\u003e\n\u003cli\u003ePower: 12V or 24V systems, 125mW\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: \u003ca href=\"https:\/\/www.fisheriessupply.com\/kus-americas-s5u-series-npt-threaded-fuel-water-tank-sensor\/s5u17\"\u003eKUS 154017\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eMaterials \u0026amp; Certifications\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRated for water, gasoline, diesel, and hydraulic oil\u003c\/li\u003e\n\u003cli\u003e316 stainless steel body and NBR float, both corrosion resistant\u003c\/li\u003e\n\u003cli\u003eIP65 sealed housing\u003c\/li\u003e\n\u003cli\u003eGenuine \u003ca href=\"https:\/\/kus-usa.com\/\"\u003eKUS Americas\u003c\/a\u003e part\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) KUS S5U-17 sending unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation \u0026amp; Wiring\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThreads into any 1.5\" NPT tank port. Use a thread sealant rated for what is in the tank.\u003c\/li\u003e\n\u003cli\u003eTurn it until the leads point toward your wire run, then snug it down. Do not overtighten.\u003c\/li\u003e\n\u003cli\u003eLeave at least 1\" between the tank bottom and the float collar (0.5\" on stainless or aluminum tanks). Measure from the inside bottom of the tank to the top of the port before picking a probe length.\u003c\/li\u003e\n\u003cli\u003ePink to ground, black to the sender terminal on your gauge. Two wires, no power feed.\u003c\/li\u003e\n\u003cli\u003eYou need a gauge on the 240-33Ω curve to read it. Most van builds do not have one until you add it, so check what your panel reads before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis is the sensor we recommend on our galley water tanks:\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/10-gallon-galley-tank-fresh-grey\"\u003e10-Gallon Galley Water Tank (Fresh\/Grey)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/nw-conversions-20-gallon-galley-water-tank-fresh-grey\"\u003e20-Gallon Galley Water Tank (Fresh\/Grey)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eWorks with any tank that has a 1.5\" NPT sender port and a gauge on the American Standard 240-33Ω curve, OEM or aftermarket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePreorder, currently about 3-4 weeks out.\u003c\/li\u003e\n\u003cli\u003eShips in 1-2 business days once in stock.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kus-usa.com\/wp-content\/uploads\/2019\/08\/Product_Data_Sheet_KUS_S5U.pdf\"\u003eKUS S5U data sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kus-usa.com\/wp-content\/uploads\/2020\/02\/KUS-USA_SendingUnit_Installation_v4.pdf\"\u003eKUS sending unit install guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kus-usa.com\/wp-content\/uploads\/2020\/02\/KUS-Troubleshooting-Guide.pdf\"\u003eKUS troubleshooting guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/support.gocodeoverland.com\/\"\u003eGoCode install guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GoCode","offers":[{"title":"Default Title","offer_id":45610908909744,"sku":"KUU0383","price":84.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0571\/2448\/7344\/files\/Untitleddesign_7.png?v=1790369557"},{"product_id":"kus-s5u-19-water-level-sensor-1-5-npt-19-probe","title":"KUS S5U-19 Water Level Sensor – 1.5\" NPT (19\" Probe)","description":"\u003ch2\u003eAbout the Product\u003c\/h2\u003e\n\u003cp\u003eThe KUS S5U-19 is a 19\" probe, 1.5\" NPT liquid level sender for water, fuel, or diesel tanks. It outputs the American Standard 240-33 ohm curve, which is what most US-market water and fuel gauges read, so it pairs with any 240-33Ω gauge without a signal converter.\u003c\/p\u003e\n\u003cp\u003eInside, a magnetic float slides along a chain of reed switches. The float is the only moving part, so there is no wiper arm to wear out or corrode.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e**CURRENTLY ON A 3-4 WEEK LEAD TIME**\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eSpecifications\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProbe length: 19\"\u003c\/li\u003e\n\u003cli\u003eMounting: 1.5\" NPT male thread, hex head\u003c\/li\u003e\n\u003cli\u003eOutput: American Standard, 240Ω empty to 33Ω full\u003c\/li\u003e\n\u003cli\u003eSensing: reed switch chain with magnetic float\u003c\/li\u003e\n\u003cli\u003eResolution: 21mm\u003c\/li\u003e\n\u003cli\u003eBody: SUS 316 stainless steel\u003c\/li\u003e\n\u003cli\u003eFloat: NBR\u003c\/li\u003e\n\u003cli\u003eLeads: PVC jacketed, pink (ground) and black (signal)\u003c\/li\u003e\n\u003cli\u003eProtection rating: IP65\u003c\/li\u003e\n\u003cli\u003eOperating temp: -40°F to +185°F\u003c\/li\u003e\n\u003cli\u003ePower: 12V or 24V systems, 125mW\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: \u003ca href=\"https:\/\/www.fisheriessupply.com\/kus-americas-s5u-series-npt-threaded-fuel-water-tank-sensor\/154019f\"\u003eKUS 154019\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eMaterials \u0026amp; Certifications\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRated for water, gasoline, diesel, and hydraulic oil\u003c\/li\u003e\n\u003cli\u003e316 stainless steel body and NBR float, both corrosion resistant\u003c\/li\u003e\n\u003cli\u003eIP65 sealed housing\u003c\/li\u003e\n\u003cli\u003eGenuine \u003ca href=\"https:\/\/kus-usa.com\/\"\u003eKUS Americas\u003c\/a\u003e part\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) KUS S5U-19 sending unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation \u0026amp; Wiring\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThreads into any 1.5\" NPT tank port. Use a thread sealant rated for what is in the tank.\u003c\/li\u003e\n\u003cli\u003eTurn it until the leads point toward your wire run, then snug it down. Do not overtighten.\u003c\/li\u003e\n\u003cli\u003eLeave at least 1\" between the tank bottom and the float collar (0.5\" on stainless or aluminum tanks). Measure from the inside bottom of the tank to the top of the port before picking a probe length.\u003c\/li\u003e\n\u003cli\u003ePink to ground, black to the sender terminal on your gauge. Two wires, no power feed.\u003c\/li\u003e\n\u003cli\u003eYou need a gauge on the 240-33Ω curve to read it. Most van builds do not have one until you add it, so check what your panel reads before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis is the sensor we recommend on our 20\" tall wheel well water tanks:\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/19-gallon-slim-dually-wheel-well-water-tank\"\u003e19-Gallon Slim Dually Wheel Well Water Tank (SP-DU-19)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/25-gallon-sprinter-dually-wheel-well-water-tank\"\u003e25-Gallon Dually Wheel Well Water Tank (SP-DU-25)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/33-gallon-wheel-well-water-tank-left-sp-l-33\"\u003e33-Gallon Wheel Well Water Tank - Left (SP-L-33)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/33-gallon-wheel-well-water-tank-right\"\u003e33-Gallon Wheel Well Water Tank - Right (SP-R-33)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/nw-conversions-28-gallon-promaster-wheel-well-tank-left-pm-l-28\"\u003e28-Gallon Promaster Wheel Well Water Tank - Left (PM-L-28)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/nw-conversions-28-gallon-promaster-wheel-well-water-tank-right-pm-r-28\"\u003e28-Gallon Promaster Wheel Well Water Tank - Right (PM-R-28)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/28-gallon-dodge-promaster-wheel-well-water-tank-center\"\u003e28-Gallon Dodge Promaster Wheel Well Water Tank - Center (PM-C-28)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eWorks with any tank that has a 1.5\" NPT sender port and a gauge on the American Standard 240-33Ω curve, OEM or aftermarket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePreorder, currently about 3-4 weeks out.\u003c\/li\u003e\n\u003cli\u003eShips in 1-2 business days once in stock.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kus-usa.com\/wp-content\/uploads\/2019\/08\/Product_Data_Sheet_KUS_S5U.pdf\"\u003eKUS S5U data sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kus-usa.com\/wp-content\/uploads\/2020\/02\/KUS-USA_SendingUnit_Installation_v4.pdf\"\u003eKUS sending unit install guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kus-usa.com\/wp-content\/uploads\/2020\/02\/KUS-Troubleshooting-Guide.pdf\"\u003eKUS troubleshooting guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/support.gocodeoverland.com\/\"\u003eGoCode install guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GoCode","offers":[{"title":"Default Title","offer_id":45610908942512,"sku":"KUU0384","price":84.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0571\/2448\/7344\/files\/Untitleddesign_5.png?v=1790369557"},{"product_id":"20-gallon-galley-water-tank-fresh-grey","title":"20-Gallon Galley Water Tank (Fresh\/Grey)","description":"\u003ch2 class=\"font-claude-response-body break-words whitespace-normal\" dir=\"auto\"\u003e\n\u003cstrong\u003eAbout the Product\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"auto\"\u003eFits seamlessly into tight spaces without sacrificing interior room. Compact box shape works in galley cabinets, bench seats, or custom storage cavities. Drains straight through your subfloor with a ball valve or connects to an undermount tank for additional storage.\u003c\/p\u003e\n\u003ch3 class=\"font-claude-response-body break-words whitespace-normal\" dir=\"auto\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"auto\"\u003e\u003cem\u003eSpecifications\u003c\/em\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\" class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eNominal dimensions: 18\" L x 16\" W x 18.375\" H\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eActual dimensions may vary up to 1.5% each.\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eCapacity\u003c\/strong\u003e: 20 gallons\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eDry Weight\u003c\/strong\u003e: 16 lbs\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eFilled Weight\u003c\/strong\u003e: 183 lbs\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eRecommended Sensor\u003c\/strong\u003e: \u003ca href=\"https:\/\/admin.shopify.com\/products\/preorder-kus-s5u-17-fuel-amp-water-level-sensor-1-5-npt-17-probe\"\u003eKUS \u003cspan\u003eS5U-17\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eRecommended Heating Pad\u003c\/strong\u003e: Facon \u003ca href=\"\/products\/facon-cw-t1218-tank-heater-pad-12-x-18-12v-dc-automatic-thermostat\"\u003eCW-T1218\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eNot designed for pressurized systems, must be vented\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"auto\"\u003e\u003cem\u003eMaterials \u0026amp; Certifications\u003c\/em\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\" class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eBPA-free, food-grade polyethylene\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eIAPMO TS 4 Certified (fresh water)\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eIAPMO TS 2 Certified (grey water)\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eCSA B45.6 Certified\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eMade in the USA\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eTEi listed and RVIA approved\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"display: flex; align-items: center; gap: 24px; margin: 12px 0 20px;\"\u003e\u003cimg alt=\"cULus Certified\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/8474\/4356\/files\/2_d9e59a56-9f1b-4edc-9aba-391ce9ac9531.png?v=1785260366\" style=\"height: 100px; width: auto;\"\u003e\u003cimg alt=\"RVIA Certified\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/8474\/4356\/files\/1_351d9eea-954f-4ba3-964c-cb86dbb4cb7c.png?v=1785260365\" style=\"height: 100px; width: auto;\"\u003e\u003c\/p\u003e\n\u003ch3 class=\"font-claude-response-body break-words whitespace-normal\" dir=\"auto\"\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul dir=\"auto\" class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eWater Tank\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e(x2) Adjustable straps\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e(x4) Mounting brackets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"auto\"\u003e\u003cem\u003ePorts \u0026amp; Plumbing\u003c\/em\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\" class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e1\/2\" NPT fittings, pre-installed\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e1.5\" NPT fittings, pre-installed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"font-claude-response-body break-words whitespace-normal\" dir=\"auto\"\u003e\u003cstrong\u003eShipping \u0026amp; Lead Time\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul dir=\"auto\" class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eShips in 1-2 business days\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"auto\"\u003e\u003cem\u003eNote: Despite great care taken during manufacturing and fulfillment, plastic tanks can become dirty and\/or scuffed in transit. This does not constitute a damaged tank. Plastic tanks can also become slightly warped, especially on the flat surfaces. This is normal and does not render the tank defective. Maintaining a completely straight\/flat surface on a rotationally molded part is not always possible, but we make every effort to keep surfaces within a 1.5 degree tolerance.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3 class=\"font-claude-response-body break-words whitespace-normal\" dir=\"auto\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul dir=\"auto\" class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eCompatible with any van, truck, or RV platform where dimensions allow, including Sprinter, Transit, and ProMaster builds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cul class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\" dir=\"auto\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\u003ca href=\"https:\/\/support.gocodeoverland.com\/\"\u003eInstall guides\u003c\/a\u003e\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\u003ca href=\"https:\/\/gocodeoverland.com\/collections\/nwc-interior-tanks\/products\/gocodeoverland.com\/blogs\/news\"\u003eOur Blog\u003c\/a\u003e\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\u003ca href=\"https:\/\/tei-test.com\/docs\/ListingSheets\/23I01.pdf\"\u003eTEI Listing\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GoCode","offers":[{"title":"Default Title","offer_id":45610909335728,"sku":"NWU0259","price":230.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0571\/2448\/7344\/files\/25_ef02d0c1-badd-4fda-bfa9-960935669c40.png?v=1790369563"},{"product_id":"kus-s5u-15-water-level-sensor-1-5-npt-15-probe","title":"KUS S5U-15 Water Level Sensor – 1.5\" NPT (15\" Probe)","description":"\u003ch2\u003eAbout the Product\u003c\/h2\u003e\n\u003cp\u003eThe KUS S5U-15 is a 15\" probe, 1.5\" NPT liquid level sender for water, fuel, or diesel tanks. It outputs the American Standard 240-33 ohm curve, which is what most US-market water and fuel gauges read, so it pairs with any 240-33Ω gauge without a signal converter.\u003c\/p\u003e\n\u003cp\u003eInside, a magnetic float slides along a chain of reed switches. The float is the only moving part, so there is no wiper arm to wear out or corrode.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e**CURRENTLY ON A 3-4 WEEK LEAD TIME**\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eSpecifications\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProbe length: 15\"\u003c\/li\u003e\n\u003cli\u003eMounting: 1.5\" NPT male thread, hex head\u003c\/li\u003e\n\u003cli\u003eOutput: American Standard, 240Ω empty to 33Ω full\u003c\/li\u003e\n\u003cli\u003eSensing: reed switch chain with magnetic float\u003c\/li\u003e\n\u003cli\u003eResolution: 21mm\u003c\/li\u003e\n\u003cli\u003eBody: SUS 316 stainless steel\u003c\/li\u003e\n\u003cli\u003eFloat: NBR\u003c\/li\u003e\n\u003cli\u003eLeads: PVC jacketed, pink (ground) and black (signal)\u003c\/li\u003e\n\u003cli\u003eProtection rating: IP65\u003c\/li\u003e\n\u003cli\u003eOperating temp: -40°F to +185°F\u003c\/li\u003e\n\u003cli\u003ePower: 12V or 24V systems, 125mW\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: \u003ca href=\"https:\/\/www.fisheriessupply.com\/kus-americas-s5u-series-npt-threaded-fuel-water-tank-sensor\/s5u15\"\u003eKUS 154015\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eMaterials \u0026amp; Certifications\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRated for water, gasoline, diesel, and hydraulic oil\u003c\/li\u003e\n\u003cli\u003e316 stainless steel body and NBR float, both corrosion resistant\u003c\/li\u003e\n\u003cli\u003eIP65 sealed housing\u003c\/li\u003e\n\u003cli\u003eGenuine \u003ca href=\"https:\/\/kus-usa.com\/\"\u003eKUS Americas\u003c\/a\u003e part\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) KUS S5U-15 sending unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation \u0026amp; Wiring\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThreads into any 1.5\" NPT tank port. Use a thread sealant rated for what is in the tank.\u003c\/li\u003e\n\u003cli\u003eTurn it until the leads point toward your wire run, then snug it down. Do not overtighten.\u003c\/li\u003e\n\u003cli\u003eLeave at least 1\" between the tank bottom and the float collar (0.5\" on stainless or aluminum tanks). Measure from the inside bottom of the tank to the top of the port before picking a probe length.\u003c\/li\u003e\n\u003cli\u003ePink to ground, black to the sender terminal on your gauge. Two wires, no power feed.\u003c\/li\u003e\n\u003cli\u003eYou need a gauge on the 240-33Ω curve to read it. Most van builds do not have one until you add it, so check what your panel reads before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThis is the sensor we recommend on our 16\" tall wheel well water tanks:\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/20-gallon-wheel-well-water-tank-left\"\u003e20-Gallon Wheel Well Water Tank - Left (SP-L-20)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/20-gallon-wheel-well-water-tank-right\"\u003e20-Gallon Wheel Well Water Tank - Right (SP-R-20)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/20-gallon-wheel-well-water-tank-centered-1\"\u003e20-Gallon Wheel Well Water Tank - Center (SP-C-20)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/25-gallon-dually-wheel-well-water-tank-copy\"\u003e22-Gallon Wheel Well Water Tank - Right (SP-R-22)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/24-gallon-wheel-well-water-tank-centered\"\u003e24-Gallon Wheel Well Water Tank - Center (SP-C-24)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/36-gallon-wheel-well-water-tank-centered\"\u003e36-Gallon Wheel Well Water Tank - Center (SP-C-36)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/24-gallon-ford-transit-wheel-well-water-tank-left\"\u003e24-Gallon Ford Transit Wheel Well Water Tank - Left (TR-L-24)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/24-gallon-ford-transit-wheel-well-water-tank-right\"\u003e24-Gallon Ford Transit Wheel Well Water Tank - Right (TR-R-24)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/24-gallon-ford-transit-wheel-well-water-tank-center\"\u003e25-Gallon Ford Transit Wheel Well Water Tank - Center (TR-C-24)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eWorks with any tank that has a 1.5\" NPT sender port and a gauge on the American Standard 240-33Ω curve, OEM or aftermarket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePreorder, currently about 3-4 weeks out.\u003c\/li\u003e\n\u003cli\u003eShips in 1-2 business days once in stock.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kus-usa.com\/wp-content\/uploads\/2019\/08\/Product_Data_Sheet_KUS_S5U.pdf\"\u003eKUS S5U data sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kus-usa.com\/wp-content\/uploads\/2020\/02\/KUS-USA_SendingUnit_Installation_v4.pdf\"\u003eKUS sending unit install guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kus-usa.com\/wp-content\/uploads\/2020\/02\/KUS-Troubleshooting-Guide.pdf\"\u003eKUS troubleshooting guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/support.gocodeoverland.com\/\"\u003eGoCode install guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GoCode","offers":[{"title":"Default Title","offer_id":45610909139120,"sku":"KUU0382","price":84.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0571\/2448\/7344\/files\/Untitleddesign_8.png?v=1790369562"},{"product_id":"kus-s5u-9-water-level-sensor-1-5-npt-9-probe","title":"KUS S5U-9 Water Level Sensor – 1.5\" NPT (9\" Probe)","description":"\u003ch2\u003eAbout the Product\u003c\/h2\u003e\n\u003cp\u003eThe KUS S5U-9 is a 9\" probe, 1.5\" NPT liquid level sender for water, fuel, or diesel tanks. It outputs the American Standard 240-33 ohm curve, which is what most US-market water and fuel gauges read, so it pairs with any 240-33Ω gauge without a signal converter.\u003c\/p\u003e\n\u003cp\u003eInside, a magnetic float slides along a chain of reed switches. The float is the only moving part, so there is no wiper arm to wear out or corrode.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e**CURRENTLY ON A 3-4 WEEK LEAD TIME**\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eSpecifications\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProbe length: 9\"\u003c\/li\u003e\n\u003cli\u003eMounting: 1.5\" NPT male thread, hex head\u003c\/li\u003e\n\u003cli\u003eOutput: American Standard, 240Ω empty to 33Ω full\u003c\/li\u003e\n\u003cli\u003eSensing: reed switch chain with magnetic float\u003c\/li\u003e\n\u003cli\u003eResolution: 21mm\u003c\/li\u003e\n\u003cli\u003eBody: SUS 316 stainless steel\u003c\/li\u003e\n\u003cli\u003eFloat: NBR\u003c\/li\u003e\n\u003cli\u003eLeads: PVC jacketed, pink (ground) and black (signal)\u003c\/li\u003e\n\u003cli\u003eProtection rating: IP65\u003c\/li\u003e\n\u003cli\u003eOperating temp: -40°F to +185°F\u003c\/li\u003e\n\u003cli\u003ePower: 12V or 24V systems, 125mW\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: \u003ca href=\"https:\/\/www.fisheriessupply.com\/kus-americas-s5u-series-npt-threaded-fuel-water-tank-sensor\/s5u09\"\u003eKUS 154009\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eMaterials \u0026amp; Certifications\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRated for water, gasoline, diesel, and hydraulic oil\u003c\/li\u003e\n\u003cli\u003e316 stainless steel body and NBR float, both corrosion resistant\u003c\/li\u003e\n\u003cli\u003eIP65 sealed housing\u003c\/li\u003e\n\u003cli\u003eGenuine \u003ca href=\"https:\/\/kus-usa.com\/\"\u003eKUS Americas\u003c\/a\u003e part\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) KUS S5U-9 sending unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation \u0026amp; Wiring\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThreads into any 1.5\" NPT tank port. Use a thread sealant rated for what is in the tank.\u003c\/li\u003e\n\u003cli\u003eTurn it until the leads point toward your wire run, then snug it down. Do not overtighten.\u003c\/li\u003e\n\u003cli\u003eLeave at least 1\" between the tank bottom and the float collar (0.5\" on stainless or aluminum tanks). Measure from the inside bottom of the tank to the top of the port before picking a probe length.\u003c\/li\u003e\n\u003cli\u003ePink to ground, black to the sender terminal on your gauge. Two wires, no power feed.\u003c\/li\u003e\n\u003cli\u003eYou need a gauge on the 240-33Ω curve to read it. Most van builds do not have one until you add it, so check what your panel reads before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWe recommend these tanks for this sensor:\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/28-gallon-sprinter-spare-tire-water-tank\"\u003e28-Gallon Spare Tire Water Tank (SP-ST-28)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/24-gallon-ford-transit-spare-tire-tank\"\u003e24-Gallon Ford Transit Spare Tire Tank (TR-ST-24)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eWorks with any tank that has a 1.5\" NPT sender port and a gauge on the American Standard 240-33Ω curve, OEM or aftermarket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePreorder, currently about 3-4 weeks out.\u003c\/li\u003e\n\u003cli\u003eShips in 1-2 business days once in stock.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kus-usa.com\/wp-content\/uploads\/2019\/08\/Product_Data_Sheet_KUS_S5U.pdf\"\u003eKUS S5U data sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kus-usa.com\/wp-content\/uploads\/2020\/02\/KUS-USA_SendingUnit_Installation_v4.pdf\"\u003eKUS sending unit install guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kus-usa.com\/wp-content\/uploads\/2020\/02\/KUS-Troubleshooting-Guide.pdf\"\u003eKUS troubleshooting guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/support.gocodeoverland.com\/\"\u003eGoCode install guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GoCode","offers":[{"title":"Default Title","offer_id":45610909630640,"sku":"KUU0378","price":69.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0571\/2448\/7344\/files\/Untitleddesign_9.png?v=1790369562"},{"product_id":"kus-s5u-8-water-level-sensor-1-5-npt-8-probe","title":"KUS S5U-8 Water Level Sensor – 1.5\" NPT (8\" Probe)","description":"\u003ch2\u003eAbout the Product\u003c\/h2\u003e\n\u003cp\u003eThe KUS S5U-8 is a 8\" probe, 1.5\" NPT liquid level sender for water, fuel, or diesel tanks. It outputs the American Standard 240-33 ohm curve, which is what most US-market water and fuel gauges read, so it pairs with any 240-33Ω gauge without a signal converter.\u003c\/p\u003e\n\u003cp\u003eInside, a magnetic float slides along a chain of reed switches. The float is the only moving part, so there is no wiper arm to wear out or corrode.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e**CURRENTLY ON A 3-4 WEEK LEAD TIME**\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eSpecifications\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProbe length: 8\"\u003c\/li\u003e\n\u003cli\u003eMounting: 1.5\" NPT male thread, hex head\u003c\/li\u003e\n\u003cli\u003eOutput: American Standard, 240Ω empty to 33Ω full\u003c\/li\u003e\n\u003cli\u003eSensing: reed switch chain with magnetic float\u003c\/li\u003e\n\u003cli\u003eResolution: 21mm\u003c\/li\u003e\n\u003cli\u003eBody: SUS 316 stainless steel\u003c\/li\u003e\n\u003cli\u003eFloat: NBR\u003c\/li\u003e\n\u003cli\u003eLeads: PVC jacketed, pink (ground) and black (signal)\u003c\/li\u003e\n\u003cli\u003eProtection rating: IP65\u003c\/li\u003e\n\u003cli\u003eOperating temp: -40°F to +185°F\u003c\/li\u003e\n\u003cli\u003ePower: 12V or 24V systems, 125mW\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: \u003ca href=\"https:\/\/www.fisheriessupply.com\/kus-americas-s5u-series-npt-threaded-fuel-water-tank-sensor\/s5u8\"\u003eKUS 154008\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eMaterials \u0026amp; Certifications\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRated for water, gasoline, diesel, and hydraulic oil\u003c\/li\u003e\n\u003cli\u003e316 stainless steel body and NBR float, both corrosion resistant\u003c\/li\u003e\n\u003cli\u003eIP65 sealed housing\u003c\/li\u003e\n\u003cli\u003eGenuine \u003ca href=\"https:\/\/kus-usa.com\/\"\u003eKUS Americas\u003c\/a\u003e part\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) KUS S5U-8 sending unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation \u0026amp; Wiring\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThreads into any 1.5\" NPT tank port. Use a thread sealant rated for what is in the tank.\u003c\/li\u003e\n\u003cli\u003eTurn it until the leads point toward your wire run, then snug it down. Do not overtighten.\u003c\/li\u003e\n\u003cli\u003eLeave at least 1\" between the tank bottom and the float collar (0.5\" on stainless or aluminum tanks). Measure from the inside bottom of the tank to the top of the port before picking a probe length.\u003c\/li\u003e\n\u003cli\u003ePink to ground, black to the sender terminal on your gauge. Two wires, no power feed.\u003c\/li\u003e\n\u003cli\u003eYou need a gauge on the 240-33Ω curve to read it. Most van builds do not have one until you add it, so check what your panel reads before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWe recommend these tanks for this sensor:\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/11-gallon-passenger-side-undercarriage-water-tank\"\u003e11-Gallon Mercedes Sprinter Undercarriage Water Tank (SP-UC-11)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/22-gallon-driver-side-undercarriage-water-tank\"\u003e22-Gallon Mercedes Sprinter Driver Side Undercarriage Water Tank (SP-UC-22)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/16-gallon-transit-undercarriage-water-tank\"\u003e16-Gallon Transit Undercarriage Water Tank (TR-UC-16)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/20-gallon-driver-side-transit-undercarriage-water-tank\"\u003e20-Gallon Driver Side Transit Undercarriage Water Tank (TR-UC-20)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eWorks with any tank that has a 1.5\" NPT sender port and a gauge on the American Standard 240-33Ω curve, OEM or aftermarket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePreorder, currently about 3-4 weeks out.\u003c\/li\u003e\n\u003cli\u003eShips in 1-2 business days once in stock.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kus-usa.com\/wp-content\/uploads\/2019\/08\/Product_Data_Sheet_KUS_S5U.pdf\"\u003eKUS S5U data sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kus-usa.com\/wp-content\/uploads\/2020\/02\/KUS-USA_SendingUnit_Installation_v4.pdf\"\u003eKUS sending unit install guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kus-usa.com\/wp-content\/uploads\/2020\/02\/KUS-Troubleshooting-Guide.pdf\"\u003eKUS troubleshooting guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/support.gocodeoverland.com\/\"\u003eGoCode install guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GoCode","offers":[{"title":"Default Title","offer_id":45610909696176,"sku":"KUU0427","price":69.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0571\/2448\/7344\/files\/Untitleddesign_6.png?v=1790369562"},{"product_id":"33-gallon-wheel-well-water-tank-left-sp-l-33","title":"33-Gallon Wheel Well Water Tank - Left (SP-L-33)","description":"\u003ch2 dir=\"auto\"\u003e\u003cstrong\u003eAbout the Product\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp dir=\"auto\"\u003eFits the wheel well space, keeping your floor plan open while adding water capacity. Sits offset toward the rear or front of the wheel well depending on placement side.\u003c\/p\u003e\n\u003ch3 dir=\"auto\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp dir=\"auto\"\u003e\u003cem\u003eSpecifications\u003c\/em\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eNominal dimensions: 48\" L x 12.5\" W x 20\" H\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eActual dimensions may vary up to 1.5% each.\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity\u003c\/strong\u003e: 33 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Weight\u003c\/strong\u003e: 25 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilled Weight\u003c\/strong\u003e: 300 lbs\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Sensor\u003c\/strong\u003e: \u003ca href=\"\/products\/preorder-kus-s5u-19-fuel-amp-water-level-sensor-1-5-npt-19-probe\"\u003eKUS S5U-19\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Heating Pad\u003c\/strong\u003e: Facon \u003ca href=\"\/products\/facon-cw-t1218-tank-heater-pad-12-x-18-12v-dc-automatic-thermostat\"\u003eCW-T1218\u003c\/a\u003e (x2)\n\u003c\/li\u003e\n\u003cli\u003eNot designed for pressurized systems, must be vented\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cem\u003eMaterials \u0026amp; Certifications\u003c\/em\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eBPA-free, food-grade plastic\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eIAPMO TS 4 Certified\u003c\/li\u003e\n\u003cli\u003eTEi listed and RVIA approved\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"display: flex; align-items: center; gap: 24px; margin: 12px 0 20px;\"\u003e\u003cimg alt=\"cULus Certified\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/8474\/4356\/files\/2_d9e59a56-9f1b-4edc-9aba-391ce9ac9531.png?v=1785260366\" style=\"height: 100px; width: auto;\"\u003e\u003cimg alt=\"RVIA Certified\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/8474\/4356\/files\/1_351d9eea-954f-4ba3-964c-cb86dbb4cb7c.png?v=1785260365\" style=\"height: 100px; width: auto;\"\u003e\u003c\/p\u003e\n\u003ch3 dir=\"auto\"\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eWater Tank\u003c\/li\u003e\n\u003cli\u003e(x2) Adjustable straps\u003c\/li\u003e\n\u003cli\u003e(x4) Mounting brackets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cem\u003ePorts \u0026amp; Plumbing\u003c\/em\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003e(2) 1.5\" NPT ports on the rectangular end, pre-marked, drill out to use\u003c\/li\u003e\n\u003cli\u003e(2) 1\/2\" NPT ports on the rectangular end\u003c\/li\u003e\n\u003cli\u003e(2) 1.5\" NPT ports on the opposite end, pre-marked, drill out to use\u003c\/li\u003e\n\u003cli\u003e(1) 1\/2\" NPT port on the opposite end\u003c\/li\u003e\n\u003cli\u003e(1) 1.5\" NPT port on top for fill or level sensor, pre-marked, drill out to use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"auto\"\u003e\u003cstrong\u003eShipping \u0026amp; Lead Time\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eShips in 1-2 business days\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003e\u003cem\u003eNote: Despite great care taken during manufacturing and fulfillment, plastic tanks can become dirty and\/or scuffed in transit. This does not constitute a damaged tank. Plastic tanks can also become slightly warped, especially on the flat surfaces. This is normal and does not render the tank defective. Maintaining a completely straight\/flat surface on a rotationally molded part is not always possible, but we make every effort to keep surfaces within a 1.5 degree tolerance.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3 dir=\"auto\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eSprinter 2500 direct fit (also fits Sprinter T1N)\u003c\/li\u003e\n\u003cli\u003eTransit (single rear wheel) fits with slightly more room around the wheel well for insulation\u003c\/li\u003e\n\u003cli\u003eProMaster requires a 3.5\" elevation to clear the larger wheel wells\u003c\/li\u003e\n\u003cli\u003eCompatible with other makes and models\u003c\/li\u003e\n\u003cli\u003eDriver side: tank sits rear of wheel well\u003c\/li\u003e\n\u003cli\u003ePassenger side: tank sits front of wheel well\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cspan\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/8474\/4356\/files\/Sprinter_and_Transit_Water_Tank-2.png?v=1765563494\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"auto\"\u003e\u003cstrong\u003eResources\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/support.gocodeoverland.com\/\"\u003eInstall guides\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/gocodeoverland.com\/blogs\/news\"\u003eOur Blog\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/tei-test.com\/docs\/ListingSheets\/23I01.pdf\"\u003eTEI Listing\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GoCode","offers":[{"title":"Default Title","offer_id":45610909728944,"sku":"NWU0244","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0571\/2448\/7344\/files\/New_Tank_Pics-4.png?v=1790369562"},{"product_id":"33-gallon-wheel-well-water-tank-right-sp-r-33","title":"33-Gallon Wheel Well Water Tank - Right (SP-R-33)","description":"\u003ch2 class=\"font-claude-response-body break-words whitespace-normal\" dir=\"auto\"\u003e\n\u003cstrong\u003eAbout the Product\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"auto\"\u003eFits the wheel well space, keeping your floor plan open while adding water capacity. Sits offset toward the rear or front of the wheel well depending on placement side.\u003c\/p\u003e\n\u003ch3 class=\"font-claude-response-body break-words whitespace-normal\" dir=\"auto\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"auto\"\u003e\u003cem\u003eSpecifications\u003c\/em\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\" class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eNominal dimensions: 48\" L x 12.5\" W x 20\" H\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eActual dimensions may vary up to 1.5% each.\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eCapacity\u003c\/strong\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e: 33 gallons\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eDry Weight\u003c\/strong\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e: 25 lbs\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eFilled Weight\u003c\/strong\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e: 300 lbs\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eRecommended sensor\u003c\/strong\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e: KUS \u003c\/span\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eS5U-19\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Heating Pad\u003c\/strong\u003e: Facon CW-T1218 (x2)\u003c\/li\u003e\n\u003cli\u003eNot designed for pressurized systems, must be vented\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"auto\"\u003e\u003cem\u003eMaterials \u0026amp; Certifications\u003c\/em\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\" class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eBPA-free, food-grade plastic\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eIAPMO TS 4 Certified\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eMade in the USA\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eTEi listed and RVIA approved\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"display: flex; align-items: center; gap: 24px; margin: 12px 0 20px;\"\u003e\u003cimg alt=\"cULus Certified\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/8474\/4356\/files\/2_d9e59a56-9f1b-4edc-9aba-391ce9ac9531.png?v=1785260366\" style=\"height: 100px; width: auto;\"\u003e\u003cimg alt=\"RVIA Certified\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/8474\/4356\/files\/1_351d9eea-954f-4ba3-964c-cb86dbb4cb7c.png?v=1785260365\" style=\"height: 100px; width: auto;\"\u003e\u003c\/p\u003e\n\u003ch3 class=\"font-claude-response-body break-words whitespace-normal\" dir=\"auto\"\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul dir=\"auto\" class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eWater Tank\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e(x2) Adjustable straps\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e(x4) Mounting brackets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"auto\"\u003e\u003cem\u003ePorts \u0026amp; Plumbing\u003c\/em\u003e\u003c\/p\u003e\n\u003cul dir=\"auto\" class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e(2) 1.5\" NPT ports on the rectangular end, pre-marked, drill out to use\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e(2) 1\/2\" NPT ports on the rectangular end\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e(2) 1.5\" NPT ports on the opposite end, pre-marked, drill out to use\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e(1) 1\/2\" NPT port on the opposite end\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e(1) 1.5\" NPT port on top for fill or level sensor, pre-marked, drill out to use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"font-claude-response-body break-words whitespace-normal\" dir=\"auto\"\u003e\u003cstrong\u003eShipping \u0026amp; Lead Time\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul dir=\"auto\" class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eShips in 1-2 business days\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal\" dir=\"auto\"\u003e\u003cem\u003eNote: Despite great care taken during manufacturing and fulfillment, plastic tanks can become dirty and\/or scuffed in transit. This does not constitute a damaged tank. Plastic tanks can also become slightly warped, especially on the flat surfaces. This is normal and does not render the tank defective. Maintaining a completely straight\/flat surface on a rotationally molded part is not always possible, but we make every effort to keep surfaces within a 1.5 degree tolerance.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3 class=\"font-claude-response-body break-words whitespace-normal\" dir=\"auto\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul dir=\"auto\" class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eCompatible with all Sprinters (1997-present), excluding Dually Sprinters\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eTransit (single rear wheel) fits with slightly more room around the wheel well for insulation\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eProMaster requires a 3.5\" elevation to clear the larger wheel wells\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eCompatible with other makes and models\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eDriver side: tank sits front of wheel well\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003ePassenger side: tank sits rear of wheel well\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0616\/8474\/4356\/files\/Sprinter_and_Transit_Water_Tank-2.png?v=1765563494\"\u003e\u003c\/p\u003e\n\u003ch3 class=\"font-claude-response-body break-words whitespace-normal\" dir=\"auto\"\u003e\u003cstrong\u003eResources\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul dir=\"auto\" class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\u003ca href=\"https:\/\/support.gocodeoverland.com\/\"\u003eInstall guides\u003c\/a\u003e\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\u003ca href=\"https:\/\/gocodeoverland.com\/blogs\/news\"\u003eOur Blog\u003c\/a\u003e\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e\u003ca href=\"https:\/\/tei-test.com\/docs\/ListingSheets\/23I01.pdf\"\u003eTEI Listing\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eRecommended KUS Sensor\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThis tank pairs with the \u003ca href=\"\/products\/preorder-kus-s5u-19-fuel-amp-water-level-sensor-1-5-npt-19-probe\"\u003eKUS S5U-19 Fuel \u0026amp; Water Level Sensor\u003c\/a\u003e — order this sender length for accurate fuel\/water readings.\u003c\/p\u003e","brand":"GoCode","offers":[{"title":"Default Title","offer_id":45610909892784,"sku":"NWU0242","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0571\/2448\/7344\/files\/SP-R-33_a919482e-d477-4b8f-a2d1-e38c8edd80da.png?v=1790369563"},{"product_id":"kus-s5u-6-water-level-sensor-1-5-npt-6-probe","title":"KUS S5U-6 Water Level Sensor – 1.5\" NPT (6\" Probe)","description":"\u003ch2\u003eAbout the Product\u003c\/h2\u003e\n\u003cp\u003eThe KUS S5U-6 is a 6\" probe, 1.5\" NPT liquid level sender for water, fuel, or diesel tanks. It outputs the American Standard 240-33 ohm curve, which is what most US-market water and fuel gauges read, so it pairs with any 240-33Ω gauge without a signal converter.\u003c\/p\u003e\n\u003cp\u003eInside, a magnetic float slides along a chain of reed switches. The float is the only moving part, so there is no wiper arm to wear out or corrode.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e**CURRENTLY ON A 3-4 WEEK LEAD TIME**\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eSpecifications\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProbe length: 6\"\u003c\/li\u003e\n\u003cli\u003eMounting: 1.5\" NPT male thread, hex head\u003c\/li\u003e\n\u003cli\u003eOutput: American Standard, 240Ω empty to 33Ω full\u003c\/li\u003e\n\u003cli\u003eSensing: reed switch chain with magnetic float\u003c\/li\u003e\n\u003cli\u003eResolution: 21mm\u003c\/li\u003e\n\u003cli\u003eBody: SUS 316 stainless steel\u003c\/li\u003e\n\u003cli\u003eFloat: NBR\u003c\/li\u003e\n\u003cli\u003eLeads: PVC jacketed, pink (ground) and black (signal)\u003c\/li\u003e\n\u003cli\u003eProtection rating: IP65\u003c\/li\u003e\n\u003cli\u003eOperating temp: -40°F to +185°F\u003c\/li\u003e\n\u003cli\u003ePower: 12V or 24V systems, 125mW\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: \u003ca href=\"https:\/\/www.fisheriessupply.com\/kus-americas-s5u-series-npt-threaded-fuel-water-tank-sensor\/s5u06\"\u003eKUS 154006\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eMaterials \u0026amp; Certifications\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRated for water, gasoline, diesel, and hydraulic oil\u003c\/li\u003e\n\u003cli\u003e316 stainless steel body and NBR float, both corrosion resistant\u003c\/li\u003e\n\u003cli\u003eIP65 sealed housing\u003c\/li\u003e\n\u003cli\u003eGenuine \u003ca href=\"https:\/\/kus-usa.com\/\"\u003eKUS Americas\u003c\/a\u003e part\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) KUS S5U-6 sending unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation \u0026amp; Wiring\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThreads into any 1.5\" NPT tank port. Use a thread sealant rated for what is in the tank.\u003c\/li\u003e\n\u003cli\u003eTurn it until the leads point toward your wire run, then snug it down. Do not overtighten.\u003c\/li\u003e\n\u003cli\u003eLeave at least 1\" between the tank bottom and the float collar (0.5\" on stainless or aluminum tanks). Measure from the inside bottom of the tank to the top of the port before picking a probe length.\u003c\/li\u003e\n\u003cli\u003ePink to ground, black to the sender terminal on your gauge. Two wires, no power feed.\u003c\/li\u003e\n\u003cli\u003eYou need a gauge on the 240-33Ω curve to read it. Most van builds do not have one until you add it, so check what your panel reads before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWe recommend these tanks for this sensor:\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/toyota-tacoma-11-gallon-wheel-well-water-tank\"\u003e11-Gallon Toyota Tacoma Wheel Well Water Tank (TOY-11)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/claude.ai\/products\/grenadier-fresh-tank\"\u003eGrenadier Fresh Tank\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eWorks with any tank that has a 1.5\" NPT sender port and a gauge on the American Standard 240-33Ω curve, OEM or aftermarket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShipping \u0026amp; Lead Time\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePreorder, currently about 3-4 weeks out.\u003c\/li\u003e\n\u003cli\u003eShips in 1-2 business days once in stock.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eResources\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kus-usa.com\/wp-content\/uploads\/2019\/08\/Product_Data_Sheet_KUS_S5U.pdf\"\u003eKUS S5U data sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kus-usa.com\/wp-content\/uploads\/2020\/02\/KUS-USA_SendingUnit_Installation_v4.pdf\"\u003eKUS sending unit install guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kus-usa.com\/wp-content\/uploads\/2020\/02\/KUS-Troubleshooting-Guide.pdf\"\u003eKUS troubleshooting guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/support.gocodeoverland.com\/\"\u003eGoCode install guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GoCode","offers":[{"title":"Default Title","offer_id":45610909663408,"sku":"KUU0426","price":69.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0571\/2448\/7344\/files\/Untitleddesign_10.png?v=1790369562"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0571\/2448\/7344\/collections\/20-gallon-wheel-well-water-tank-passenger-side-6044140.png?v=1791568325","url":"https:\/\/featherbuilt.com\/collections\/water-tanks.oembed","provider":"Featherbuilt","version":"1.0","type":"link"}