Rear view into an empty Sprinter with a full bamboo wall and ceiling kit and black strut rails

Materials & System

Van Interior Materials

Every panel, cabinet and rail we make: what it's made of, how it goes together, and how to pick the right one for your build.

  • Bare Sprinter cargo area before the wall kit, showing the factory holes

    Step 1 · Rivet nuts set the anchor points

    Most go into the van's factory holes. A few get opened up or drilled new, all marked by our template, so there's no measuring.

  • First black strut rail and lower bamboo panel installed along a Sprinter wall

    Step 2 · Rails bolt to the rivet nuts

    CNC-drilled aluminum strut rails, cut and drilled to match your van.

  • Bamboo wall panels held between black strut rails

    Step 3 · Panels drop in between the rails

    Each rail captures the panel edges above and below it, so walls and ceiling go up row by row.

  • Finished bamboo wall and ceiling shell seen from the rear doors of a Sprinter

    Step 4 · Everything else mounts to the rails

    Cabinets, shelves, beds, hooks and bags use standard ¼-20 hardware, and move later without touching the van.

Close-up of a black strut rail capturing the edge of a bamboo wall panel

Rivet nuts hold only the shell

The rivet nuts carry the panels, rails and trim. Your cabinets and gear ride on the rails, so the layout can change as your travels do.

Shop Wall and Ceiling kits
  • Bamboo wall and ceiling panels with black strut rails in a Sprinter

    Bamboo

    Warm, amber edge-grain bamboo. The material that makes a van feel like a cabin.

    Face: amber edge-grain bamboo
    Core: solid bamboo layers
    Arrives: raw. Finish with hard wax oil, tung oil or a furniture-grade wood oil
    Care: wipe clean once finished; re-sand and refinish over time
    Kit from: $4,350 (Sprinter 144)

    Best for: a warm wood interior you can refinish for years.

    Shop bamboo kits 
  • Natural plywood wall panels with black strut rails in an empty van

    Natural Plywood

    Clean, pale Baltic birch that takes paint, stain, clear coat or upholstery. The blank canvas.

    Face: raw birch veneer
    Core: Baltic birch plywood
    Arrives: raw. Sand and finish (paint, clear coat, stain and poly, hard wax oil), or upholster it
    Care: depends on your finish; keep it dry until finished
    Kit from: $3,000 (Sprinter 144)

    Best for: your own color, stain or upholstery, and the lowest cost.

    Shop natural plywood kits 
  • White laminate wall panels with raw aluminum strut rails

    White Laminate

    Bright, clean, and ready the day it arrives.

    Face and back: white high-pressure laminate
    Core: Baltic birch plywood
    Arrives: finished
    Care: household cleaners are fine; skip scouring pads; wax the raw edges for water resistance
    Lead time: adds 10–12 business days
    Kit from: $4,600 (Sprinter 144)

    Best for: a bright, airy interior that's easy to keep clean.

    Shop white laminate kits 
  • Close-up of the textured Black Hex phenolic panel surface

    Black Hex

    Textured black phenolic over Baltic birch, for the parts of the van that take a beating.

    Face: durable textured phenolic; smooth phenolic back
    Core: Baltic birch plywood
    Arrives: finished
    Care: damp cloth or mild cleaner; fingerprints and dust show; wax the raw edges
    Used for: lower wall panels under any upper material, and cabinets

    “The Black Hex panels have taken quite a few hits from strollers and bikes and still are without a scratch.” (Featherbuilt customer)

    Shop kits with Black Hex lowers 

Compare panel materials

PropertyNatural PlywoodBambooWhite LaminateBlack Hex
LookPale birch; paint, stain or upholsterWarm amber grainBright whiteBlack, textured
ArrivesRawRawFinishedFinished
You'll need to finish itYes (or upholster)YesNoNo
CleaningDepends on your finishEasy once oiledEasiest; household cleaners OKEasy; shows fingerprints
Used forWalls, ceiling, cabinetsWalls, ceilingWalls, ceiling, cabinetsLower walls, cabinets
Extra lead timeNoneNone+10–12 business daysNone
Sprinter 144 kit$3,000$4,350$4,600Lowers from $3,150
Best forYour own color or upholstery, lowest costWarm wood interiorBright and low-maintenanceGear, bikes, high-traffic areas

Prices are for a Sprinter 144 kit with aluminum rails. Not sure yet? Order a sample pack.

  • Sprinter 170 with bamboo walls and ceiling, black strut rails and dark lower cabinets

    Bamboo + black rails

    Warm wood, crisp lines.

  • Natural plywood walls under a bamboo ceiling with black strut rails

    Plywood walls, bamboo ceiling

    Light walls with a warm ceiling overhead.

  • Light upper wall panels over Black Hex lower panels with aluminum strut rails

    Any upper, Black Hex lower

    Your look up high, tough panels down low where boots, bikes and bins hit. Available on every Wall and Ceiling kit.

  • White laminate panels with raw aluminum strut rails beside the rear door

    White + aluminum rails

    Bright and clean.

Cabinet finishes

Standard finishes, order online. Our cabinets are built from ½″ plywood in the same materials as our panels, so walls and cabinets match or contrast on purpose.

  • Natural plywood van cabinet in the Featherbuilt shop in Denver

    Natural Plywood

    Ships raw; finish it to match your panels.

  • White laminate galley cabinet with a butcher-block top

    White Laminate

    Finished and easy to clean. Ships in 2–3 weeks.

  • Black Hex wheel-well electrical cabinet installed in a van

    Black Hex

    Finished, textured and tough.

    Shop wheel-well cabinets 

Custom laminates for custom builds

When we build your interior, the palette opens up. Customers have chosen Winter Sky, Green Slate, blue, light blue, Fossil Grey, slate and more.

Winter Sky is a soft blue-green that shifts with the light, from sage in the shade to blue-gray in the sun. Here it is in four different vans.

  • Winter Sky laminate galley cabinets with a butcher-block counter in a Sprinter 144

    Frost · Sprinter 144

    Winter Sky galley and bench.

  • Winter Sky laminate cabinets under a slatted wood ceiling in a Sprinter 144

    Pebble · Sprinter 144

    Winter Sky galley and upper cabinets.

  • Winter Sky laminate upper cabinets under a pine ceiling in a Transit 148

    Peak · Transit 148

    Winter Sky uppers and lowers.

    See this van 
  • Winter Sky laminate galley sink cabinet in a Sprinter 144

    Nessa · Sprinter 144

    Winter Sky lower cabinets.

Black powder-coat strut rails across bamboo wall panels

Rails and hardware

Strut rails. Lightweight aluminum strut channel, CNC-drilled to line up with your van's mounting points. Nine rails come with a Sprinter 144 Wall and Ceiling kit, in raw aluminum or black powder coat (+10–12 business days).

Strut rail vs L-track. L-track only takes fittings at fixed slots about an inch apart. Strut channel is open along its whole length, so you can mount anywhere with standard ¼-20 bolts, hooks and clips.

Shop rails and hardware
  • Paper towel holder and storage net hanging from a black strut rail

    Hooks and accessories

    Hooks, nets and bungees clip onto the rail anywhere and move whenever you want.

  • Aluminum strut rails bolted along the bare metal wall of a Sprinter before panels go on

    Rivet nuts

    Threaded inserts that turn thin sheet metal into solid anchor points. Install and remove parts as often as you like without damaging the van.

  • Channel nut and bolt sliding inside a black strut rail over a white wall panel

    Channel nuts

    ¼-20 nuts that slide into the rail and lock where you tighten them, for cabinets, benches, shelves, hooks and clips.

Natural plywood walls under a bamboo ceiling with black strut rails

Bamboo and natural plywood ship raw. Finish them your way.

Raw panels let you choose the look and the protection. A few hours of finishing before install is all it takes.

  • Bamboo: hard wax oil, tung oil, or a furniture-grade wood oil. Re-oil or re-sand later.
  • Natural plywood: sand lightly, then paint, clear coat, stain and poly, or hard wax oil. Or upholster it.
  • Keep raw panels dry until they're finished.
Read the install guides

See it in person

Wood and laminate look different in every light. Get a sample pack with each panel material, both rail finishes, a rivet nut and a channel nut before you order.

Materials FAQ

How thick are the panels?

Every wall and ceiling panel is ¼″ (6 mm). Cabinets are built from ½″ plywood.

Do bamboo and natural plywood panels come finished?

No. Bamboo and natural plywood ship raw so you can choose the finish. White Laminate and Black Hex arrive finished.

Can I upholster the natural plywood, or do I need to coat it?

Both work. Natural plywood is a good base for fabric or felt. Any face you leave exposed needs a finish: paint, clear coat, stain and poly, or hard wax oil.

Which material is the most durable?

Black Hex. Its textured phenolic face is made for high-traffic areas, which is why we offer it as a lower panel under any upper material.

Can I mix materials?

Yes. Every Wall and Ceiling kit can be ordered with Black Hex lower panels and Bamboo, Natural Plywood, or White Laminate above.

What's the difference between aluminum and black rails?

Only the finish. Both are the same aluminum strut rail. Black powder coat adds 10–12 business days.

Do I need to drill holes in my van?

A few. Most rivet nuts go into the van's factory holes; some of those get opened up, and a few new holes are drilled. Our template marks every one, so there's no measuring.

What can I mount to the rails?

Cabinets, shelves, benches, beds, hooks, bags and clips. Anything that takes ¼-20 hardware can go anywhere along the rail.

How is strut rail different from L-track?

L-track only accepts fittings at fixed slots. Strut channel is open along its full length, so you can position things exactly where you want them, using standard ¼-20 hardware.

How long until my kit ships?

Wall and Ceiling kits are made to order and ship in 4–6 weeks. White Laminate panels or black rails add 10–12 business days.

How do I clean the panels?

White Laminate takes household cleaners. Black Hex needs only a damp cloth or mild cleaner. Bamboo and natural plywood clean according to the finish you apply.

Can I see the materials before I buy?

Yes. Order a sample pack, or visit our Denver shop by appointment.

Do you offer other cabinet colors?

Online, our cabinets come in Natural Plywood, White Laminate and Black Hex. For custom builds we offer custom laminate colors, including Winter Sky, Green Slate, blue, light blue, Fossil Grey and slate. Get in touch to plan one.

  • Finished Sprinter 144 with a Winter Sky galley and a rear bed platform

    Sprinter 144

    Winter Sky galley, white walls.

  • Sprinter 170 Extended with bamboo wall panels and black strut rails

    Sprinter 170 Extended

    Bamboo panels, black rails.

  • Sprinter 144 with natural plywood walls and a bamboo ceiling

    Sprinter 144

    Natural plywood walls, bamboo ceiling.

  • Sprinter 170 with bamboo walls and ceiling, black strut rails and dark lower cabinets

    Sprinter 170

    Bamboo walls and ceiling, black rails.