Unistrut Nuts and Machine Screws 10-Pack

The perfect duo for all your Unistrut uses!

Whether you're installing Featherbuilt products or fabricating your own components, these ¼-20 Machine Screws and Unistrut Nuts are the perfect pairing for strut channel, aka Unistrut.

Drop one into the rail channel, slide it to where you need it, and tighten your bolt down — the nut cams against the channel walls and locks in place. No spring to fuss with and nothing to pre-load; it slides freely when loose and bites when snug.

Use them to mount cabinets, bed platforms, gear tracks, and accessories anywhere along your rail run, and reposition them as your build evolves. Standard 1/4-20 thread pairs with common bolts and the rest of the Featherbuilt hardware system.

Unistrut nuts: What are they?

Unistrut nuts are toothed metal fasteners designed to act as anchor points within the open slot of unistrut channel.

Serrated Teeth: Grooves on the top edges bite down and lock securely on the inner lips of the unistrut. When tightened, the nut is prevented from slipping and moving under heavy loads or vibrations.

Wedge Action: The wedged shape of the sides of the nut forces a tight mechanical lock against the unistrut walls as you tighten them down. This also prevents them from spinning or rotating while you turn the bolt.

Compatibility: These have a ¼-20 threaded center hole to accept bolts, machine screws, and anything with a ¼-20 thread.